Steel wire rope Diepa H40 (SKZ8), non-rotation resistant.
Product information
General: Diepa H40 is a non-rotation resistant wire rope with compacted inner and outer strands. The rope has a very high breaking force.
Applications: Jib adjusting rope. Jib retaining rope.
Lay: Ordinary lay
Total number of wires: 4-6mm 95, 7-15mm 262, 16-24mm 319, 25-44mm 347, 45-64mm 427, 65-76mm 487
ISO 4309 Rope Category No: 4-6mm RCN.02, 7-15mm RCN.04, 16-44mm RCN.09, 45-76mm RCN.13
- Marking: According to standard
- Finish: Galvanized or bright.
- Standard: EN 12385-4
- Warning: Not to be used with a swivel.
- Fill factor: 0.7403
- RCN: 02
Product FAQ
What surface finish and tensile strength does this steel wire rope have?
This steel wire rope has a Galvanized, Bright and is manufactured with a tensile strength of 1770, 1960, 2160 N/mm².A bright (uncoated) finish has no corrosion protection and is therefore primarily used in dry, indoor, or controlled environments. Bright wire ropes are generally selected for cost reasons. The galvanized coating provides corrosion protection through a zinc layer, making the rope suitable for outdoor use and humid operating conditions.
Does this steel wire rope have any special design or performance features?
This steel wire rope is compacted, resulting in a smoother surface, higher breaking load, and improved wear resistance compared to standard wire rope constructions.
What is the construction, core type, and lay of this steel wire rope?
This steel wire rope is constructed with 8 strands.
It is manufactured with a steel core, offering higher structural stability, improved resistance to crushing, and reliable performance under heavy loads and multi-layer winding conditions.
It is manufactured with an ordinary right-hand lay (sZ), providing a balanced combination of flexibility, wear resistance, and stable handling. This is the most commonly used lay for general It is manufactured with an ordinary left-hand lay (zS), offering similar performance characteristics to right-hand ordinary lay but designed for specific directional or equipment requirement
