The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper (almost 99,9%)
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: See the manufacturer's product data sheet below for guidance on dimension selection.
Select a row from the table below, then click the add to quote button
Part Code Ferrule size Length
09.09TCU01 1 6.5
09.09TCU02 2 9
09.09TCU025 2.5 12
09.09TCU03 3 14
09.09TCU035 3.5 16
09.09TCU04 4 18
09.09TCU045 4.5 20
09.09TCU05 5 23
09.09TCU06 6 27
09.09TCU065 6.5 29
09.09TCU07 7 32
09.09TCU08 8 36
09.09TCU09 9 40
09.09TCU10 10 45
09.09TCU11 11 50
09.09TCU12 12 54
09.09TCU13 13 59
09.09TCU14 14 63
09.09TCU16 16 72
09.09TCU18 18 81
09.09TCU20 20 90

Diameter after pressing, see instruction.
Length is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.


info / downloads