Rud

Octagonal lifting eye approved for lifting. Llifting with an angle of inclination is allowed with reduction of WLL (see diagram at blueprint) but we strongly recomment to use the Rud RM lifting eye only for straight lifting. 

Applied harmonized norms: DIN EN ISO 12100: 2011-03 

  • Material: Forged high tensile steel.
  • Marking: According to standard, CE-marked
  • Temperature range: -40° up to 200°C (no reduction of WLL)
  • Standard: EN 1677-1
  • Warning: RUD RM eye nuts are only to be used with bolts or threaded studs with a min. quality class 8.8 and who are 100 % crack detected. Non certified bolts or threaded studs are not allowed.
  • Safety factor: 4:1
  • Grade: 8
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Thread
mm
WLL 90°
ton
A
mm
B
mm
C
mm
D
mm
E
mm
T
mm
Weight
kg
06.RMM06 0.4 M6 0.1 12 11 10 25 25 34 0.1
06.RMM08 0.8 M8 0.2 12 11 10 25 25 34 0.1
06.RMM10 1 M10 0.25 12 11 10 25 25 34 0.1
06.RMM12 1.6 M12 0.24 14 13 12 30 30 41 0.16
06.RMM14 2 M14 0.75 16 15 14 35 35 48 0.26
06.RMM16 3.2 M16 1 16 15 14 35 35 48 0.3
06.RMM48 4.8 M18 1.2 18 17 16 40 40 55 0.4
06.RMM20 6 M20 1.5 18 17 16 40 40 55 0.39
06.RMM22 6 M22 1.5 22 21 20 50 50 70 0.65
06.RMM24 8 M24 2 22 21 20 50 50 70 0.7
06.RMM27 8 M27 2 28 26 24 60 60 85 1.4
06.RMM30 12 M30 3 28 26 24 60 60 85 1.32
06.RMM36 16 M36 4 40 43 38 90 100 130 5.65
06.RMM42 24 M42 6 40 43 38 90 100 130 5.5
06.RMM48 32 M48 8 40 43 38 90 100 130 5.3

info / downloads