Filter
Wire Rope Clamps
Certex Norge AS has a wide range of wire rope clamps, clips and grips.
All products derive from quality suppliers and produced to either meet or exceed industry standards.
Wire Rope Grip POWERTEX PWRG
Rope Ø range:
4
POWERTEX Wire rope grip PWRG is approved for lifting when assembly is made according to the user instructions.
It is designed to be used with 6 or 8 stranded steel wire rope with steel or fiber core with tensile strength up to 1960 N/mm2.
Correctly mounted the assembly will withstand 80% of the steel wire ropes minimum breaking strength.
Safe - The grips are designed to assure high friction between wire rope and grip
Quick and easy to use – Only 3 grips needed for safe assembly
Quick mounting thanks to the recessed bolt head seats that hold the bolt while tightening the nuts
Low maintenance thanks to galvanization of grips and Dacrotized bolt and nuts
Features: PWRG-4, 6, 8, 10 are drop forged. PWRG-12, 16, 20, 25, 35 are casted.Finish: Galvanized.Warning: Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
Request quotation
Wire Rope Grip Eureka
Rope Ø range:
6
Wire rope grip approved for lifting.
Note: The wire rope grip can be used with 6 or 8-strand steel wire ropes with steel or fiber core, in a wire rope quality of up to 1960 N/mm2. When properly assembled, the assembly can handle up to 90% of the minimum breaking load of the steel wire rope (MBL).
Not for use with compacted or hammered wire ropes.
It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.
Follow the fitting instructions in the user manual before use.
Material: 4-5 and 6 mm are casted, the rest are dropforged.Finish: 4-5 and 6 mm zinc-plating, the rest hot dip galvanizing.Warning: In case the clamps half-parts tangent each other when tightening the bolts, a smaller EUREKA wire clamp shall be used.
Request quotation
Rope Pulling Clamp
MBL:
7
|
Rope Ø range:
18
These wire grips are the ideal tool to safely tensioning of copper and steel cables. They have a wide range of applications in manufacturing, agriculture and bridge construction. The profile of the clamping jaws is specifically designed for copper and steel cables so that the stretched material does not become damaged.
Universal application: long, parallel tension clamping jaws made out of hardened and high-grade steel
Corrosion protection: galvanized and burnished components
Extremely durable and long-lasting: reliable, sophisticated process of cold-forming technology for the manufacturing of the jaws
Easy handling: ergonomic
Remote release possible: hole in clamping jaw
Self-acting holding: spring effect on the tensioned cable
Slip-resistant holding of the cable even at maximum traction
Note: With a tensile strength of 700N/mm2
Request quotation
U-Bolt Clip DIN 741 Stainless
Rope Ø range:
3
Wire rope clips for steel wire rope for general applications.
Design: Forged U-bolt and casted bases.
Material: Bases AISI 316, u-bolt AISI 304.Marking: According to standardStandard: DIN 741 Note: Follow the fitting instructions in the user manual before use.Warning: Not approved for lifting.
Request quotation
Wire Rope Clamp BG
Rope Ø range:
6
General: Wire rope clamp type, approved for lifting. Requires fewer clamps per fixation, e.g. two wire clamps instead of four, for 16 mm cable. Symmetrical – cannot be wrongly fitted. The clamps ensure fixation of the wire to a degree of at least 90% of the minimum breaking load of the wire in accordance with the current European standard.
Design: Bases of cast steel.
Finish: Hot dip galvanizedNote: Follow the fitting instructions in the user manual before use. Not for use with compacted or hammered wire ropes.
Request quotation
U-Bolt Clip DIN 741
Rope Ø range:
3
Wire rope clips for steel wire rope for general applications.
Features: Forged u-bolts and casted bases.Marking: According to standardFinish: Electrogalvanised Standard: DIN 741 Note: Follow instruction Fitting instruction of wire rope clip drawing Warning: Not for lifting
Request quotation
Wire Rope Clip BG-S, Stainless
Rope Ø range:
3
Wire ropes clips for steel wire ropes for general applications.
Design: Pressed steel plate. Fixed screws. Acid-resistant.
Material: AISI 316Note: The IronGrip Wire Clips are approved for lifting applications for up to 5 mm ropes/wires.
Request quotation
Duplex Wire Rope Clip
Rope Ø range:
5
General: Duplex wire rope clips for general applications.
Design: Pressed of steel plate, loose screws and bolts.
Finish: GalvanizedWarning: Not for lifting
Request quotation