Wire Rope Grip POWERTEX PWRG
Rope Ø range:
4
POWERTEX Wire rope grip PWRG is approved for lifting when assembly is made according to the user instructions.
It is designed to be used with 6 or 8 stranded steel wire rope with steel or fiber core with tensile strength up to 1960 N/mm2.
Correctly mounted the assembly will withstand 80% of the steel wire ropes minimum breaking strength.
Safe - The grips are designed to assure high friction between wire rope and grip
Quick and easy to use – Only 3 grips needed for safe assembly
Quick mounting thanks to the recessed bolt head seats that hold the bolt while tightening the nuts
Low maintenance thanks to galvanization of grips and Dacrotized bolt and nuts
Features: PWRG-4, 6, 8, 10 are drop forged. PWRG-12, 16, 20, 25, 35 are casted.Finish: Galvanized.Warning: Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
Request quotation
Wire Rope Grip Eureka
Rope Ø range:
6
Wire rope grip approved for lifting.
Note: The wire rope grip can be used with 6 or 8-strand steel wire ropes with steel or fiber core, in a wire rope quality of up to 1960 N/mm2. When properly assembled, the assembly can handle up to 90% of the minimum breaking load of the steel wire rope (MBL).
Not for use with compacted or hammered wire ropes.
It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.
Follow the fitting instructions in the user manual before use.
Material: 4-5 and 6 mm are casted, the rest are dropforged.Finish: 4-5 and 6 mm zinc-plating, the rest hot dip galvanizing.Warning: In case the clamps half-parts tangent each other when tightening the bolts, a smaller EUREKA wire clamp shall be used.
Request quotation
Wedge Socket 3000
MBL:
10
|
Rope Ø range:
9
|
WLL:
2
General: Intended for attaching of wire rope where switching often occur, e.g. blocks of mobilecranes, or to be able to adjust the length of the wire rope. See recommended assembly to get correct results.
Design: Bended and welded house made of plate. Wedge made of plate with milled grove and symmetrical shaped to avoid error assemblies. Turned bolt with head, low nut and split cotter. The wedge sockets is delivered complete. Note that some wedge houses fit to different sizes of wedges.
Marking house and wedge: Dimension area.
Proof: Batch proof 2 x WLL.
Material: House, wedge and bolt by high-tensile construction steel.Finish: Electro-zink platedNote: To elevators and mines we recommend other designs.Safety factor: 5:1
Request quotation
Thimble-Extra Solid
Rope Ø range:
32
Design: Pressed of profiled steel.Standard: BS 464.Finish: Galvanized.
Request quotation
Thimble G-414, Crosby - Extra heavy
Rope Ø range:
52
General:
The use of the G-414 extra heavy thimbles for your wirerope slings ensures a greater protection against wear of the wire rope and deformation of the wire rope eye.
Features:
Longer service life.
Material: SteelMarking: According to standardFinish: Hot-dip galvanisedStandard: EN 13411-1
Request quotation
Stainless Eye Terminal
MBL:
6.8
|
Rope Ø range:
7
Eye terminals for pressing or swaging onto stainless steel wire rope. They are mainly used as an attachment to rigging screws or forks.
Material: Stainless steel AISI 316.Marking: logo, wire size and swage depth.Temperature range: -50°C to +100°C and briefly up to +200°CFinish: High polished.
Request quotation
Wedge Socket for Lifts - Type D
Rope Ø range:
14
Type D complet with eyebolt + spring.
Features: Wedge suspension kit type D with eyebolt, spring, nuts and split pinMaterial: Galvanised SteelMarking: According to standardFinish: GalvanisedStandard: EN 13411-7 DIN 15315 replaced by EN 13411-7
Request quotation
Open Spelter Sockets with Bolt and Nut OSS B
MBL:
55
|
Rope Ø range:
22
Quenched and tempered cast steel range steel wire rope sockets for embedment with cast compound with mechanical values (Charpy-V > 42 Joule /-20°C) for tough and low temperature use. For wire rope diameter 6 - 203 mm (1/4” - 8”).
2 surface finishes available:
Model OSS B: blue painted. (OSS 196 - OSS 100 only hot dipped galvanized)
Model OSS B.GAL: Hot dipped galvanized.
Features:
Bolt securing by nut and cotter pin.
All spelter sockets have a 100% efficiency.
Also avaiable with pin + cotter pin ( type OSS P )
Material: Quenched and tempered cast steelMarking: Size, wire rope diameter and batch or serial number.Temperature range: From - 40°C up to +110°C - 100% capacity range.Finish: OSS B blue painted - OSS BGALV : Hot dipped galvanized.Note: For intermediate rope diameter select fittings with nearest following size. Warning: Compare the spelter's and the wire rope's minimum breaking load.
Request quotation
Ferrule INOX Talurit®
Ferrule size mm:
11
These ferrules are normally used on stainless steel wire ropes to achieve the best possible resistance against corrosion.
Stainless steel Ferrule - recommended for machine pressing only. Suitable for long term use in salt water, waste water treatment and chemical processing.
Material: Stainless steel, AISI 316.Note: See the manufacturer's product data sheet below for guidance on dimension selection. We do not guarantee strength of slings for lifting activities made of INOX ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of the minimum-breaking load (MBL) of the wire rope. Verifying tests must be done in order to find out the strength.
Request quotation
U-Bolt Clip DIN 741 Stainless
Rope Ø range:
3
Wire rope clips for steel wire rope for general applications.
Design: Forged U-bolt and casted bases.
Material: Bases AISI 316, u-bolt AISI 304.Marking: According to standardStandard: DIN 741 Note: Follow the fitting instructions in the user manual before use.Warning: Not approved for lifting.
Request quotation
Wire Rope Clip BG-S, Stainless
Rope Ø range:
3
Wire ropes clips for steel wire ropes for general applications.
Design: Pressed steel plate. Fixed screws. Acid-resistant.
Material: AISI 316Note: The IronGrip Wire Clips are approved for lifting applications for up to 5 mm ropes/wires.
Request quotation
Rope Pear Socket Nemag
MBL:
35
|
Rope Ø range:
21
|
WLL:
5
The Nemag Rope Pear Socket is designed to, in combination with the Nemag Quick Release Link, smoothly pass over cabel sheaves. The life span of the Nemag Rope Pear Socket generally surpasses that of the steel wire rope. The Rope Pear socket can be fitted by casting with a 2-component casting mass without the need for outside assistance, and ensures a strong connection. Nemag Rope Pear Sockets are suited to any type of steel wire rope.
Material: High grade casted steel.Marking: Manufacturers logo, size and batch number.Warning: The specified capacities shown are for grab operation. For other applications use safety factor 5:1Safety factor: 5:1
Request quotation
Ferrule K Talurit®
Ferrule size mm:
14
The turnback ferrule system is easy to use. It is quick, safe and has proved itself to be totally reliable. The ferrules are thoroughly specified and very well defined for many different wire rope applications.
The ferrules can be used for single layer steel wire ropes with round strands up to fill factor 0,60 and grade 1960.
Material: AluminumMarking: According to standardStandard: Talurit splicing system The ferrules do not correspond to standard EN 13411-3 but have been tested and verified by Talurit.Note: See the manufacturer's product data sheet below for guidance on dimension selection.
Request quotation
Rope Pulling Clamp
MBL:
7
|
Rope Ø range:
18
These wire grips are the ideal tool to safely tensioning of copper and steel cables. They have a wide range of applications in manufacturing, agriculture and bridge construction. The profile of the clamping jaws is specifically designed for copper and steel cables so that the stretched material does not become damaged.
Universal application: long, parallel tension clamping jaws made out of hardened and high-grade steel
Corrosion protection: galvanized and burnished components
Extremely durable and long-lasting: reliable, sophisticated process of cold-forming technology for the manufacturing of the jaws
Easy handling: ergonomic
Remote release possible: hole in clamping jaw
Self-acting holding: spring effect on the tensioned cable
Slip-resistant holding of the cable even at maximum traction
Note: With a tensile strength of 700N/mm2
Request quotation
Quick Release Link for Pear Socket Nemag
MBL:
54
|
WLL:
8
The Nemag Quick Release Link has been balanced and perfected to become the most reliable, quickest and safest coupling method for ropes and chains. The contact surface of the C-section has been hardened, which considerably lengthens the life span. The construction of the locking piece ensures reliable functioning; even under severe circumstances. The locking pieces are interchangeable.
Optional: Nemag also supplies a key especially designed for the Quick Release Link. This key has a hexagonal head that fits into the keyhole of the locking piece. The horizontal handle provides sufficient grip to be able to open or close any locking piece with one short movement. The sharp end of the handel can be used to remove dirt on the outside (of the keyhole).
Marking: According to standard, CE-markedStandard: EN 1677-1 Warning: The working load is the recommended maximum load for grabbing operations when Quick Release Links and Rope Pear Sockets are passing over a special cable sheave. For other applications a safety factor in line with official international and national guidelines has to be adhered to.
Request quotation
Closed Spelter Socket CSS
MBL:
8
|
Rope Ø range:
7
The Ropeblock closed spelter socket CSS designed with mechanical values (Charpy-V > 42 joule / - 20° C) for though and low temperature use.
All sockets have a 100% efficency on the MBL of the steel wire rope but are limited to the MBL of the socket.
The CSS sockets are Type Approved by DNV and Lloyd’s Register.
CSS 296 until CSS 201 only available with hot dipped galvanized finish.
Material: Quenched and tempered cast steel.Marking: According to standard, CE-markedTemperature range: - 40°C to + 110°C - Use at higher temperatures possible with reduction of WLL.Finish: Hot dipped Galvanized (G) or painted blue (P).Standard: EN 10204
Request quotation
Stainless Steel Thimble
Rope Ø range:
16
Pressed of profile steel. The first choice for harsh environment of the marine sector.
Material: Stainless acidproof steel AISI 316.Finish: Polished
Request quotation
Open Wedge Socket OWS B with Bolt
MBL:
55
|
Rope Ø range:
22
Intended for attaching of wire rope where switching often occur, e.g. blocks of mobilecranes, or to be able to adjust the length of the wire rope. See recommended assembly to get correct results.
The wedge socket is delivered complete with wedge, bolt, nut and cotterpin.
2 surface finishes available:
Model OWS B: blue painted.
Model OWS BGAL: Hot dipped galvanized.
Model OWS 0.25 and OWS 0.5 only standard available in hot dipped galvanized.
Material: Quenched and tempered cast steel.Marking: Size, wire rope diameter and batch or serial number.Temperature range: -40°C to + 110°C - Use at higher temperatures possible with reduction of WLL.Finish: Blue painting or hot dipped galvanized.Note: The efficiency of a 6 and 8 strand wire rope/wedge socket connection is 80% of the minimum breaking load of the wire but limited to the minimum breaking load of the socket (MBL).
Request quotation
Wedge Socket for Lifts - Type A
Rope Ø range:
11
Features: Wedge Suspension kit Type A with Eyebolt nuts and split pinMaterial: Galvanised SteelMarking: According to standard, Size and CE markFinish: GalvanisedStandard: EN 13411-7
Request quotation
Ferrule TCU Talurit®
Ferrule size mm:
16
The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.
Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.
These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.
Material: Copper (almost 99,9%)Marking: According to standardStandard: EN 13411-3Note: See the manufacturer's product data sheet in the tab "Documents" for guidance on dimension selection.
Request quotation
Wedge Socket for Lifts
Rope Ø range:
8
When fitting the rope to the socket as much slack as possible should be removed from the system in order to maximise the available eye bolt adjustment. The load should then be applied to the assembly and the wedge observed to seat correctly in the socket body.A single DIN 1142 wire rope grip should then be fitted across the two parts of rope near to the socket body. This, along with the split pin fitted into the wedge, ensures that the wedge cannot become displaced in a slack rope condition.
Features: High Quality Lift Suspension Wedge SocketMaterial: SteelMarking: According to standard, SizeFinish: GalvanizedStandard: EN 13411-7 DIN 15315 replaced by EN 13411-7Safety factor: 10:1
Request quotation
Ferrule T Talurit®
Ferrule size mm:
5
The turnback ferrule system is easy to use. It is quick, safe and has proved itself to be totally reliable. The ferrules are thoroughly specified and very well defined for many different wire rope applications.
The ferrules can be used for fibre core single layer wire ropes, steel core single layer wire ropes, rotation resistant wire ropes and spiral strand ropes.
Material: AluminumMarking: According to standardStandard: EN 13411-3 except size rangeNote: See the manufacturer's product data sheet in the tab "Documents" for guidance on dimension selection.
Request quotation
Thimble Heavy Duty Stub-end K2-B GN
Rope Ø range:
34
Suitable for wire rope.
Standard certification : Certificate of Conformity
Material: Mild steel.Temperature range: -20°C up to +200°CFinish: Galvanized.
Request quotation
GN SO4 CR Socket
MBL:
140
|
Rope Ø range:
36
We deliver a quality GN SO4 CR Socket. A socket in galvanized cast steel.
Material: Cast steel.Finish: Painted/galvanized.Safety factor: 5:1.
Request quotation