Filter
Lifting Eye RUD VWBG-V
WLL:
0.45
Rotating 360°, pivoting 230°
Optical markings for easy determination for withdraw from service
Ball bearing
Marking: According to standardStandard: EN 1677-1 Safety factor: 4:1
Request quotation
Lifting Eye Nut RUD RM
WLL:
4.8
Octagonal lifting eye approved for lifting. Llifting with an angle of inclination is allowed with reduction of WLL (see diagram at blueprint) but we strongly recomment to use the Rud RM lifting eye only for straight lifting.
Applied harmonized norms: DIN EN ISO 12100: 2011-03
Material: Forged high tensile steel.Marking: According to standard, CE-markedTemperature range: -40° up to 200°C (no reduction of WLL)Standard: EN 1677-1 Warning: RUD RM eye nuts are only to be used with bolts or threaded studs with a min. quality class 8.8 and who are 100 % crack detected. Non certified bolts or threaded studs are not allowed.Safety factor: 4:1Grade: 8
Request quotation
Lifting Eye Starpoint RUD VRS-F
WLL:
0.75
Star shaped design, can be adjusted to the direction of pull. Higher load capacities than DIN 580-Eyebolts
Material: Forged high tensile engineering steel, crack detekted.Marking: According to standard, WLLFinish: Striking fluorescent pink powder coatingStandard: EN 1677-1 Safety factor: 4:1
Request quotation
Lifting Eye RUD VLBG-PLUS
WLL:
1.35
VLBG load ring will turn 360°, adjustable in pull direction. Load ring foldable, full WLL in any load direction.
Material: Forged of high strength steel.Marking: According to standard, CE-marked, WLLFinish: Striking fluorescent pink powder coating.Standard: EN 1677-1 Safety factor: 4:1
Request quotation
Lifting Eye RUD VLBS
WLL:
4
Weld-on Lifting Eye
Material: Forged of high strength steel.Marking: CE-marked, WLL, indication for the most unfavourable case.Finish: Striking fluorescent pink powder coating.Safety factor: 4:1.
Request quotation
RUD Lifting Eye Bolt RS-M
WLL:
2
Octagonal lifting eye approved for lifting.
Material: Forged of high strength steel.Marking: According to standard, CE-marked, WLL, indication for the most unfavourable caseTemperature range: -40°C up to 200°CStandard: EN 1677-1 Safety factor: 4:1
Request quotation
Lifting Eye Starpoint RUD VRM
WLL:
0.4
Design: Octagonal lifting eye.
For bolts with min. quality class 10.9
Material: Forged of high strength steel.Marking: According to standard, CE-marked, WLL, indication for the most unfavourable case.Finish: Striking fluorescent pink powder coating.Standard: EN 1677-1 Safety factor: 4:1
Request quotation
Lifting Eye RUD VRS-F Starpoint, UNC thread
WLL:
0.75
360° adjustable in force direction
several times higher WLL than the DIN 580 eye bolt
Easy-Fit-Key for easy assembly and disassembly
Marking: CE-markedSafety factor: 4:1
Request quotation