Wire rope Dyform 8
Rope Diameter,:
30
|
Rope lay:
zZ
|
Finish:
Galvanized
|
Tensile strength N/mm²:
1960
Superior bending fatigue life when compared with other conventional eight strand ropes.
Excellent resistance to crushing and abrasion particularly on multi layer coiling resulting from the Dyform strands.
Reduced elongation results from increased steel content and the Dyform process.
Optional plastic impregnation to further extend fatigue life, improve structural stability and resistance to corrosion.
Standard: EN 12385-4
ISO 4309 Rope Category No: 10-17mm RCN.04, 18-34mm RCN.09, 36-50mm RCN.11
Features: High breaking force.Material: High Carbon SteelFinish: Galvanised or UngalvanisedFill factor: 0.68
Request quotation
Wire rope Dyform 34LR-PI
Rope Diameter,:
13
|
Rope lay:
zZ
|
Finish:
Galvanized
|
Tensile strength N/mm²:
1960
Very Low Rotation.
Superior bending fatigue life when compared with conventional low rotation ropes.
Excellent resistance to crushing and abrasion particuarly on multi layer drums resulting from the compacted strands.
Reduced elongation results from increased steel content and the Dyform process.
Plastic impregnation to further extend fatigue life, improve structural stability and resistance to corrosion.
ISO 4309 Rope Category No: 10-40mm RCN.23-2, 42-76mm RCN.31
Features: Extremely strong low rotation Crane Hoist Rope.Material: High Carbon SteelMarking: According to standard, CE-marked, On Termination IDFinish: Galvanised or UngalvanisedStandard: EN 12385-4 Fill factor: 0.76
Request quotation
Lubricant Brilube 30
Typical applications: Tower Cranes, mobile cranes, dockside cranes and fishing ropes.
General: A semi-dry thin film lubricant with excellent penetration and corrosion resisting properties. Formulated for frequent use in harsh working conditions, whilst minimising lubricant build-up and abrasive particle contamination.
Minimum application temperature: -5°C.
Application method: Dipping, brushing or spraying.
Temperature range: -30°C up to +60°C
Request quotation
Lubricant Brilube 40
Typical applications: Lifts, elevators and similar friction driven rope installations.
General: A synthetic lubricant which deposits a slip-resistant film on the wire surfaces. Formulated for use where frictional grip is vital, it provides internal lubrication whilst avoiding excessive build-up with repeated applications.
Minimum application temperature: -5°C.
Application method: Dipping or brushing.
Temperature range: -80°C up to +40°C
Request quotation
Lubricant Brilube 70
Typical applications: Off-shore cranes, standing rigging, mooring and tower cables and fishing ropes.
General: For heavy duty working ropes in highly aggresive environments and standing ropes in marine locations. A medium thixotropic gel lubricant with stable properties over a wide temperature range offering longlasting corrosion protection.
Minimum application temperature: -20°C.
Method of lubrication: With high pressure equipment.
Temperature range: -55°C up to +100°C
Request quotation