Go to homepage
Your Quote
  • Products
  • Steel Wire Rope and Accessories
    Chains and components
    Lifting Gear
    Cranes and Hoists
    Non-certified hardware
    Lashing
    Fibre ropes, slings and lashing
    Fall Arrest Equipment
    Aquaculture | Mooring
    Maritim | Fire and Rescue
    Our brands
    Steel Wire Ropes
    • General Steel Wire Rope
    • Crane Ropes
    • Elevator Ropes
    Stainless Steel Wire and Stay Rope
    • Stainless
    • Galvanized
    • Coated
    Steel Wire Rope Products
    • Cable Grips
    • Cutters, Lubricants and Socketing Compounds
    • Blocks
    • GN Assortments
    Steel Wire Rope Accessories
    • Ferrules and Terminal Fittings
    • Wire Rope Clamps
    • Thimbles
    • Sockets
    Lifting Slings
    • Grommets and Slings
    Grade 10
    • Master Links and Assemblies grade 100
    • Hooks grade 100
    • Chains and Slings Grade 100
    • Coupling Links Grade 100
    Grade 6 and 8
    • Master links and assemblies grade 80
    • Hooks Grade 80
    • Chains and Slings Grade 80
    • Coupling Links Grade 80
    Offshore
    • Master Links and Assemblies (Offshore)
    • Hooks (Offshore)
    Lifting Yoke
    • Lifting Yoke
    • Lifting Magnets
    • Barrel Grabs
    • Pallet Forks
    • Show all
    Clamps
    • Plate Clamps
    Lifting slings
    • Webbing Slings
    • Grommets and Slings
    • Roundslings
    Loose gear
    • Lifting eyes and nuts
    • Shackles
    • Rigging screws
    • Swivels
    Manual Hoists and trolleys
    • Chain Block and Lever Hoists
    • Trolleys
    Lifting Cranes
    • Pillar Jib Cranes
    • Wall Mounted Jib Cranes
    Non-certified Hardware
    • Quick Links and Snap Hooks
    • Thimbles and Shackles
    • Pins and Rings
    • Eye Bolts and Rigging Screws
    Other Non-Certified Products
    • Manual winches
    • Chains - Not For Lifting
    • Sheaves and Blocks
    Chain Lashing
    • Lashing chain
    Miscellaneous
    • Lashing
    • Container Securing Equipment
    • Accessories
    Fibre Ropes
    • Dyneema
    • Fibre Ropes
    • Hawsers
    Fibre Slings
    • Roundslings
    • Webbing Slings
    Securing Movement
    • Lashing
    Fall Arrest Equipment
    • Fall protection kits
    • Harnesses
    • Blocks
    • Lanyards and Safety Ropes
    • Show all
    PPE
    • Protective accessories
    Marine Farming
    • Buoys and Marker Lights
    • Fibre Ropes and Mooring Shackles
    • Steel Anchoring Equipment
    • Anchor and Chains
    Rescue Equipment
    • Immersion Suits and Lifejackets
    • Rafts and Pyrotechnical
    Rescue equipment at sea
    • Immersion Suits and Lifejackets
    • Rafts, Boats and Pyrotechnical
    • Other Products
    Shipping Equipment
    • IMO-Signs
    • Sextant, Bells and Assorted Products
    • Clocks and Barometers
    Boat Equipment
    • Lifejackets
    • Anchors, Buoys and Assorted
    • Flotation Suits, Jackets and Vests
    Firefighting Equipment
    • Extinguishers, Suits and Hoses
    • Masks and Detectors
    • Tractel
    • Rud
    • Crosby Group
    • Powertex
    • Protekt
    • Kito
    • Bridon
    • Blue Wave
    • Vital
    • Talurit
    • Yoke
    • Regatta
    • Skylotec
    • Gunnebo Industries
    • Ropeblock
    • Ropetex
    • JDT Theile
    • Wirelock Millfield
  • News
  • Documents
  • Certificates
  • Services
  • Crane- and Lifting Technique
    MRT
    Maritime Service
    Load Testing, Spooling and Splicing
    NDT
    Aqua Culture and Mooring Solutions
  • Our KnowHow
  • Lifting KnowHow
    What is WLL, SWL and MBL?
  • About us
  • Career
    Sustainability
    The Transparency Act
    Our Certifications
    Lifting Solutions Group
    Vision, Mission and Core Values
    • Sustainable Supply Chain
    • Sustainable operations
    • Sustainable Customer Offer
  • Contact us
  • Departments
    Administration Administration
    • Follestad Follestad
    • Bergen Bergen
    • Stavanger Stavanger
    • Trondheim Trondheim
    • Kristiansund Kristiansund
    • Hammerfest Hammerfest
    • Frøya Frøya
    • Harstad Harstad
    • Kristiansand Kristiansand
    • Florø Florø
  • Conditions
  • Privacy Policy
    General terms and conditions
  • Explore
  • Aspire Range™
    Renewables
Show all categories Loose gear Back
  • Show Loose gear
  • Lifting eyes and nuts
  • Shackles
  • Rigging screws
  • Swivels
  1. Products
  2. Lifting Gear
  3. Loose gear
  • Products
    • Steel Wire Rope and Accessories
    • Chains and components
    • Lifting Gear
      • Lifting Yoke
      • Clamps
      • Lifting slings
      • Loose gear
        • Lifting eyes and nuts
        • Shackles
        • Rigging screws
        • Swivels
    • Cranes and Hoists
    • Non-certified hardware
    • Lashing
    • Fibre ropes, slings and lashing
    • Fall Arrest Equipment
    • Aquaculture | Mooring
    • Maritim | Fire and Rescue
    • Our brands
Filter

Loose Gear

Loose gear, also known as rigging hardware, is a collection of various equipment used in the rigging and lifting industry. It includes items such as shackles, hooks, swivels, chains, and other devices that are used to connect ropes, slings, and other lifting equipment to loads. One of the main advantages of loose gear is its versatility, which allows it to be used in a wide range of applications, including construction, manufacturing, shipbuilding, and more. They can handle various weight capacities and sizes of loads, and can be used in both vertical and horizontal positions. Loose gear is typically made of durable materials such as steel or alloy and have been designed to withstand harsh environments and heavy loads. They also come in different types and sizes to meet different requirements and can be customized to meet specific needs. Investing in high-quality loose gear is crucial for ensuring the safety and efficiency of lifting operations and also helps to reduce costs associated with frequent replacements and maintenance. It can also help to improve productivity and reduce the risk of injury.


Dee Shackle POWERTEX PDSP – Screw Pin front
Dee Shackle POWERTEX PDSP
WLL: 0.5
Dee type shackle PDSP is a high quality shackle intended to be used in demanding environments. It is supplied with screw pin for quick and easy opening/closing. The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 2, Grade A. Features: Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889 All bodies and bolts marked with batch number for traceability The body is forged in closed dies All parts are made from alloy steel being quenched and tempered All parts including screw pins are hot dip galvanized for long life High quality hot dip galvanization process giving an exclusive mat grey finish Screw pins are additionally painted in blue for quick and easy detection as original POWERTEX parts Multilanguage user manuals Material: Forged alloy steel, supplied with screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Screw pin additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6

Request quotation

Details
Bow Shackle POWERTEX PBSB 17t
Bow Shackle POWERTEX PBSB
WLL: 0.5
Bow type shackle PBSB is a high quality shackle intended for use in demanding environments. It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin. The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 3, Grade A. Features: Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889 All bodies and bolts marked with batch number for traceability Larger sizes equipped with arrows to indicate 45 degrees to vertical Raised pad for dedicated and easy individual ID (3,25 t and up) The bow is forged in closed dies All parts are made from alloy steel being quenched and tempered All parts including bolts and nuts are hot dip galvanized for long life High quality hot dip galvanization process giving an exclusive mat grey finish Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts Retaining pins made from stainless steel Multilanguage user manuals Material: Forged alloy steel, supplied with safety bolt and nuts. Stainless steel retaining pins.Marking: According to standard, CE-marked, POWERTEX (PX or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6

Request quotation

Details
Dee Shackle POWERTEX PDSB front
Dee Shackle POWERTEX PDSB
WLL: 0.5
Dee type shackle PDSB is a high quality shackle intended for use in demanding environments. It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin. The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 3, Grade A. Features: Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889 All bodies and bolts are marked with batch number for traceability The body is forged in closed dies All parts are made from alloy steel being quenched and tempered All parts including bolts and nuts are hot dip galvanized for long life High quality hot dip galvanization process giving an exclusive mat grey finish Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts Retaining pins made from stainless steel Multilanguage user manuals Material: Forged alloy steel, supplied with alloy safety bolt and nuts. Stainless steel retaining pinsMarking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1.Grade: 6

Request quotation

Details
Rigging Screw POWERTEX PRSJ Forged
Rigging Screw POWERTEX PRSJ
WLL: 0.2
POWERTEX Rigging screw PRSJ is durable, easy to adjust and can be used in a variety of applications where the length of the load bearing part needs to be adjusted. It is designed to provide quick rigging using standard tools and the same time closed body design effectively protects the thread. Compact, lightweight construction Safe – Each rigging screw is proofload tested and CE-marked prior delivery making them suitable for lifting operations (except M6 and M8). Easy to adjust the length using standard tools The adjusted length is securely locked by closing the two counter nuts Durable all steel construction All parts are hot dip galvanized for long service life (except  M6 and M8  which are electro galvanized) The closed body design protects the threads from damage and at the same time prevent dirt from entering into the center body The jaws are equipped with safety bolts and nuts and stainless steel retaining pins Safety bolts and nuts are additionally painted in blue and red for quick identification as POWERTEX original parts   Multilanguage user manuals included Standard: Machinery directive 2006/42/EC Marking: CE-marked, POWERTEX, batch number, WLL (except M6 and M8),Finish: Hot dip galvanized, except from M6 and M8, which are electro galvanized.Note: Avoid eccentric loading of the rigging screw. Apply the load straight/in-line.Warning: *M6 and *M8 not for lifting! Do not adjust the length under load when lifting.Safety factor: 5:1

Request quotation

Details
Bow Shackle POWERTEX PBSP – Screw Pin front
Bow Shackle POWERTEX PBSP
WLL: 0.33
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments. It is supplied with a screw pin for quick and easy opening. The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A. Features: Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889 All bodies and screw pins marked with batch number for traceability Larger sizes equipped with arrows to indicate 45 degrees to vertical Raised pad for dedicated and easy individual ID (3,25 t and up) The bow is forged in closed dies All parts are made from alloy steel being quenched and tempered All parts including screw pins and nuts are hot dip galvanized for long life High quality hot dip galvanization process giving an exclusive mat grey finish Screw pins are additionally painted in blue and red for quick and easy detection as  original POWERTEX parts Multilanguage user manuals Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Bolt additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6

Request quotation

Details
Insulated Swivel 8-088N
Insulated Swivel 8-088N
Chain diameter: 13 | WLL: 5.3
Insulated blank swivel for various lifting applications. Design for protection of overhead crane during welding operations on suspended loads. Individually tested to resist 1000 Volts insulated with Test Certificate. For connection with suspension parts you will need Coupling Pin and C-Sleeve Set X-P015, please order them separately. Order suspension parts Coupling Master Link 8-051. 2 pcs. half coupling links can be ordered as 1 pc. X-015 + 1 pc. X-P015. Other suspension parts on request. Features: Built-in RFID/NFC chipMaterial: Quenched and tempered alloy steelMarking: According to standardStandard: EN 1677-1 Safety factor: 4:1Grade: 8

Request quotation

Details
Clevis Shackle X-066 Grade 10
Clevis Shackle X-066, painted grade 100 shackle
WLL: 4
At least 25% greater WLL than traditional Grade 8 products. Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL. Tempering temperature minimum 400°C. Magnaflux crack detection is performed 100% on each batch. Manufactured in accordance with EN 1677- 1 and ASME B30.26. When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL. Material: Quenched and Tempered Alloy SteelMarking: According to standard, Size, grade, manufacturer ID, traceabilityTemperature range: -40° up to +200°C (without reduction in WLL).Finish: Blue paintedStandard: EN 1677-1 Safety factor: 4:1Grade: 10

Request quotation

Details
Lifting Eye RUD VRS-F Starpoint, UNC thread
Lifting Eye RUD VRS-F Starpoint, UNC thread
WLL: 0.75
360° adjustable in force direction several times higher WLL than the DIN 580 eye bolt Easy-Fit-Key for easy assembly and disassembly Marking: CE-markedSafety factor: 4:1

Request quotation

Details
PLE pewag profilift eta
Lifting Point Pewag PLE/N Eta
WLL: 8
Weldable lifting point. High-tensile eyebolts pewag profilift eta, for welding onto machine parts or vehicle bodies. Ideal for hanging of lifting and lashing parts. Due to the integrated spring, the ring will be kept in each requested position. The instructions according to DIN EN ISO 14341 are valid for the welding. The welding may only be carried out by a welding operator with a valid qualification according to EN 287-1. The lifting points will be packed individually and together with a user manual and welding instructions. Permissible usage Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull (see picture 1 and 2). Non permissible usage Make sure when choosing the assembly that improper load can not arise e.g. if: • The direction of pull is obstructed • Direction of pull is not in the foreseen area • Loading ring rests against edges and load Material: Alloy steelMarking: According to standard, CE-marked, WLL, the load capacity is clearly marked on the welding pad.Standard: EN 1677-1 Safety factor: 4:1

Request quotation

Details
RUD Lifting Eye Bolt RS-M
RUD Lifting Eye Bolt RS-M
WLL: 2
Octagonal lifting eye approved for lifting. Material: Forged of high strength steel.Marking: According to standard, CE-marked, WLL, indication for the most unfavourable caseTemperature range: -40°C up to 200°CStandard: EN 1677-1 Safety factor: 4:1

Request quotation

Details
Starcon Lifting Eye with standard Coupling Link
Lifting Eye with standard Coupling Link Starcon
Starcon lifting eyes are made of a special cast steel alloy which after hardening obtains an exceptionally high strength. The strength of the material exceeds a safety factor of 5. Marking: Load group, STARCON, serialnumber, CE

Request quotation

Details
Lifting Eye APS
Lifting Eye APS
WLL: 15
Advantages:                         Compact design                         Secured four times against breakage                         D-link swings 180°                         Weld-on shackle made of material S355JR according to EN 10025 Also loadable transversely to the swivel direction  Material: Eye of alloy steel. Welding attatchment of steel St 52.Marking: CE-marked, WLL.Finish: Painted.Note: The surface that the lifting eyes shall be attached to shall be flat and tolerate the load it is going to be exposed to.Safety factor: 4:1

Request quotation

Details
Bolt Type Chain Shackle Crosby G-2150
Bolt Type Chain Shackle Crosby G-2150
WLL: 0.5
Design: Bolt Type Chain shackle. Thin hex head boltnut with cotter pin. Meets the performance requirements of Federal Specification RR-C-271H, Type IVB, Grade A, Class 3, except for those provisions required of the contractor. Material: Forged — Quenched and Tempered, with alloy pins.Marking: According to standard, CE-markedFinish: Hot Dip galvanized or self colored.Standard: EN 13889 Safety factor: 6:1Grade: 6

Request quotation

Details
Lifting eye VLBG
Lifting Eye RUD VLBG-PLUS
WLL: 1.35
VLBG load ring will turn 360°, adjustable in pull direction. Load ring foldable, full WLL in any load direction. Material: Forged of high strength steel.Marking: According to standard, CE-marked, WLLFinish: Striking fluorescent pink powder coating.Standard: EN 1677-1 Safety factor: 4:1

Request quotation

Details
Swivel Eye / Jaw Crosby S4
Swivel Eye / Jaw Crosby S4
WLL: 15
Design: Swivel with eye and jaw equipped with tapered roller thrust bearing. Features: Suitable for frequent rotation under load. All swivels individually Proof Tested to 2 times the Working Load Limit. Pressure lube fitting provided. All jaws complete with bolts, nuts and cotter pins. Other types and capacities up to 1250 t available on demand. Marking: CE-markedNote: Always check before use if your steel wire rope is suitable for use with a swivel.Warning: Not to be used on demolition- (wrecking-) balls!Safety factor: 5:1

Request quotation

Details
Swivel Jaw End Crosby G-403
Swivel Jaw End Crosby G-403
WLL: 20.5
Chain swivels with out bearing. According to Federal Specification RR-C-271F. Material: Hot dip Galvanized - Quenched & TemperedMarking: CE-marked, WLLFinish: GalvanizedNote: The swivels are positioning devices and are not intended to rotate under load. For load swivels, see ball bearing swivels.Safety factor: 5:1

Request quotation

Details
De-centered Lifting Point DLP
De-centered Lifting Point DLP
WLL: 15
The DLP is ideal in narrow spaces, such as corners or edge position, as the housing has a compact design. Marking: CE-markedSafety factor: 4:1Grade: 6

Request quotation

Details
Starcon Universal Lifters
Universal Lifters Starcon
The Starcon universal lifting eye is made for lifting precast concrete elements together with spherical head anchors. The claw grips on to the head of the spherical head anchors. The Starcon universal lifting eye has been load tested with up to 2 times of the working load limit (WLL). Unique or general certificate on request. Material: Special alloy steel.Marking: According to standard, CE-marked, Load group, STARCON, batch codeTemperature range: 200°C.Finish: Electrogalvanized (silver).Standard: CEN/TR 15728 - VDI/BV-BS 6205 Safety factor: 4:1

Request quotation

Details
Rud eye nut RM
Lifting Eye Nut RUD RM
WLL: 4.8
Octagonal lifting eye approved for lifting. Llifting with an angle of inclination is allowed with reduction of WLL (see diagram at blueprint) but we strongly recomment to use the Rud RM lifting eye only for straight lifting.  Applied harmonized norms: DIN EN ISO 12100: 2011-03  Material: Forged high tensile steel.Marking: According to standard, CE-markedTemperature range: -40° up to 200°C (no reduction of WLL)Standard: EN 1677-1 Warning: RUD RM eye nuts are only to be used with bolts or threaded studs with a min. quality class 8.8 and who are 100 % crack detected. Non certified bolts or threaded studs are not allowed.Safety factor: 4:1Grade: 8

Request quotation

Details
GN H14 Forged Rope Shackle Sling Protector- Wide Body
GN H14 Forged Rope Shackle Sling Protector- Wide Body
WLL: 40
We deliver a quality GN H14 Forged Rope Shackle Sling Protector- Wide Body and alloy steel quenched and tempered shackle. Material: Alloy steel quenched and tempered.Marking: According to standardTemperature range: -20°C up to 200°C (WLL 40 ton) -40°C up to 200°C (above WLL 40 ton)Finish: Painted.Standard: EN 10204 Note: WLL 2500 ton up to 3000 ton have SF 4,5:1. WLL 3500 ton up to 4000 have SF 4:1.Safety factor: 5:1

Request quotation

Details
Lifting Eye RUD VLBS
Lifting Eye RUD VLBS
WLL: 4
Weld-on Lifting Eye Material: Forged of high strength steel.Marking: CE-marked, WLL, indication for the most unfavourable case.Finish: Striking fluorescent pink powder coating.Safety factor: 4:1.

Request quotation

Details
Ball-bearing Lifting Point BLP
Ball-bearing Lifting Point BLP
The BLP is a very versatile lifting point and can safely be used for most applications. Prevents damages on load surface, can be turned and tilted and is rotating during lift. Proof load: 2.5 times WLL Marking: CE-markedSafety factor: 4:1Grade: 6

Request quotation

Details
Starcon Lifters, flexible coupling
Lifters flexible Coupling Starcon
The Starcon Lifting Eye is a special steel component made for concrete casting. The sperical claw grips on to the head below the Starcon head anchor. The Starcon lifting eye has been tensile tested with 2 times of the safe load. All test results will be reported. Unique certifcates are made for each delivery. Material: Special alloy steelMarking: According to standard, Load group, STARCON, batch code, CETemperature range: 200°CFinish: ElectrogalvanizedStandard: CEN/TR 15728 - VDI/BV-BS 6205 Safety factor: 4:1

Request quotation

Details
Rigging screw jaw/eye type 802
Rigging Screw Gunnebo No. 802 Jaw-Eye
WLL: 5
Supplied as standard jaw-eye. WLL rated similar to U.S. specification FF-T-791.b. Proof loaded and approved for lifting. Material: High tensile alloy steel.Marking:  WLL.Temperature range: -20°C up to +200°CFinish: Galvanized.Warning: The turnbuckles are not allowed to be adjusted in length under load, when they are used for lifting!Safety factor: 5:1Grade: 8

Request quotation

Details

General

  • Homepage
  • Products
  • Documents
  • Services
  • About us
  • Contact us

Other

  • Renewables
  • Sustainability
  • Aspire range
  • Axel Johnson International

About us

CERTEX specializes in lifting technology and load securing. Whatever the lifting process in industry, ports, construction sites, mining or many other industries, CERTEX offers the right products and services. With a large product range of more than 10.000 items and access to the warehouses of our worldwide suppliers, knowledge about the wire rope and all other areas of lifting technology, we can solve your problem.

Follow us on

Certex Norge AS, Johan Follestads vei 6, N-3474 Åros, Norway
+47 66 79 95 00 | certex.oslo@certex.no

Request sent successfully
Request wasn't sent - a error occured. Please try again.

Request an offer

Request an offer for the choosen products

Product(s) in this request:
Please enter a valid email address.
Fields marked with * are mandatory.