Go to homepage
Your Quote
  • Products
  • Steel Wire Rope and Accessories
    Chains and components
    Lifting Gear
    Cranes and Hoists
    Non-certified hardware
    Lashing
    Fibre ropes, slings and lashing
    Fall Arrest Equipment
    Aquaculture | Mooring
    Maritim | Fire and Rescue
    Our brands
    Steel Wire Ropes
    • General Steel Wire Rope
    • Crane Ropes
    • Elevator Ropes
    Stainless Steel Wire and Stay Rope
    • Stainless
    • Galvanized
    • Coated
    Steel Wire Rope Products
    • Cable Grips
    • Cutters, Lubricants and Socketing Compounds
    • Blocks
    • GN Assortments
    Steel Wire Rope Accessories
    • Ferrules and Terminal Fittings
    • Wire Rope Clamps
    • Thimbles
    • Sockets
    Lifting Slings
    • Grommets and Slings
    Grade 10
    • Master Links and Assemblies grade 100
    • Hooks grade 100
    • Chains and Slings Grade 100
    • Coupling Links Grade 100
    Grade 6 and 8
    • Master links and assemblies grade 80
    • Hooks Grade 80
    • Chains and Slings Grade 80
    • Coupling Links Grade 80
    Offshore
    • Master Links and Assemblies (Offshore)
    • Hooks (Offshore)
    Lifting Yoke
    • Lifting Yoke
    • Lifting Magnets
    • Barrel Grabs
    • Pallet Forks
    • Show all
    Clamps
    • Plate Clamps
    Lifting slings
    • Webbing Slings
    • Grommets and Slings
    • Roundslings
    Loose gear
    • Lifting eyes and nuts
    • Shackles
    • Rigging screws
    • Swivels
    Manual Hoists and trolleys
    • Chain Block and Lever Hoists
    • Trolleys
    Lifting Cranes
    • Pillar Jib Cranes
    • Wall Mounted Jib Cranes
    Non-certified Hardware
    • Quick Links and Snap Hooks
    • Thimbles and Shackles
    • Pins and Rings
    • Eye Bolts and Rigging Screws
    Other Non-Certified Products
    • Manual winches
    • Chains - Not For Lifting
    • Sheaves and Blocks
    Chain Lashing
    • Lashing chain
    Miscellaneous
    • Lashing
    • Container Securing Equipment
    • Accessories
    Fibre Ropes
    • Dyneema
    • Fibre Ropes
    • Hawsers
    Fibre Slings
    • Roundslings
    • Webbing Slings
    Securing Movement
    • Lashing
    Fall Arrest Equipment
    • Fall protection kits
    • Harnesses
    • Blocks
    • Lanyards and Safety Ropes
    • Show all
    PPE
    • Protective accessories
    Marine Farming
    • Buoys and Marker Lights
    • Fibre Ropes and Mooring Shackles
    • Steel Anchoring Equipment
    • Anchor and Chains
    Rescue Equipment
    • Immersion Suits and Lifejackets
    • Rafts and Pyrotechnical
    Rescue equipment at sea
    • Immersion Suits and Lifejackets
    • Rafts, Boats and Pyrotechnical
    • Other Products
    Shipping Equipment
    • IMO-Signs
    • Sextant, Bells and Assorted Products
    • Clocks and Barometers
    Boat Equipment
    • Lifejackets
    • Anchors, Buoys and Assorted
    • Flotation Suits, Jackets and Vests
    Firefighting Equipment
    • Extinguishers, Suits and Hoses
    • Masks and Detectors
    • Tractel
    • Rud
    • Crosby Group
    • Powertex
    • Protekt
    • Kito
    • Bridon
    • Blue Wave
    • Vital
    • Talurit
    • Yoke
    • Regatta
    • Skylotec
    • Gunnebo Industries
    • Ropeblock
    • Ropetex
    • JDT Theile
    • Wirelock Millfield
  • News
  • Documents
  • Certificates
  • Services
  • Crane- and Lifting Technique
    MRT
    Maritime Service
    Load Testing, Spooling and Splicing
    NDT
    Aqua Culture and Mooring Solutions
  • Our KnowHow
  • Lifting KnowHow
    What is WLL, SWL and MBL?
  • About us
  • Career
    Sustainability
    The Transparency Act
    Our Certifications
    Lifting Solutions Group
    Vision, Mission and Core Values
    • Sustainable Supply Chain
    • Sustainable operations
    • Sustainable Customer Offer
  • Contact us
  • Departments
    Administration Administration
    • Follestad Follestad
    • Bergen Bergen
    • Stavanger Stavanger
    • Trondheim Trondheim
    • Kristiansund Kristiansund
    • Hammerfest Hammerfest
    • Frøya Frøya
    • Harstad Harstad
    • Kristiansand Kristiansand
    • Florø Florø
  • Conditions
  • Privacy Policy
    General terms and conditions
  • Explore
  • Aspire Range™
    Renewables
Show all categories Plate Clamps Back
  • Show Plate Clamps
  1. Products
  2. Lifting Gear
  3. Clamps
  4. Plate Clamps
  • Products
    • Steel Wire Rope and Accessories
    • Chains and components
    • Lifting Gear
      • Lifting Yoke
      • Clamps
        • Plate Clamps
      • Lifting slings
      • Loose gear
    • Cranes and Hoists
    • Non-certified hardware
    • Lashing
    • Fibre ropes, slings and lashing
    • Fall Arrest Equipment
    • Aquaculture | Mooring
    • Maritim | Fire and Rescue
    • Our brands
Filter

Plate Clamps

Plate clamps, also known as steel plate clamps or plate lifting clamps, are a type of lifting equipment used to securely lift and move steel plates and other flat material in various industrial and construction applications. They are typically made of durable materials such as cast iron or steel and have a secure grip that securely attaches to the plate, allowing for safe and efficient lifting. One of the main advantages of plate clamps is their versatility, which allows them to be used in a wide range of applications, including construction, manufacturing, shipbuilding, and more. They can handle various thicknesses and sizes of steel plates and other flat materials, and can be used in both vertical and horizontal positions. Plate clamps also have a high resistance to abrasion and corrosion, making them suitable for use in harsh environments. They are also easy to operate and maintain, which reduces downtime and increases efficiency. Investing in high-quality plate clamps is crucial for ensuring the safety and efficiency of lifting operations and also helps to reduce costs associated with frequent replacements and maintenance. It can also help to improve productivity and reduce the risk of injury.


Eagle Clamp SBBE
Eagle Clamp SBBE
WLL: 2
Lifting, turning over, moving, suspending, tensioning, and clamping fixtures. Marvelous, universal high-technology clamp which does the work of several models, all by itself. Excellent for: Vertical lifting of flat steel plates.  Vertical lifting of oddly shaped steel plates. Horizontal lifting of thick steel plates. Lifting flanged steel. Lifting H steel at an angle. Lifting oddly shaped, flanged steel at an angle. Lifting large steel pipes. Fully forged product made from alloy steel. Manufactured under strict quality control. All clamps are tested for flaws magnetically. Two different lifting positions are built into clamp and the sling is arranged so that operations can allow for the shape of the object and the lifting direction, and therefore can be performed safely. Warning! Insert the item to be lifted deep into the clamp opening. When securing a steel item with a clamping screw, be careful not to tilt the swivel jaw. Before starting any lifting operations, double check that the bolt clamping safety check line cannot be seen. Material: Alloy steelSafety factor: 4:1

Request quotation

Details
Beam Clamp Superclamp S1-S4
Beam Clamp Superclamp S1-S4
WLL: 6
Beam clamp designed specifically to provide maximum grab width adjustment. Incorporating adjusting mechanism and lifting shackle. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1

Request quotation

Details
Drum Lifting Clamp - IPDV
Drum Lifting Clamp - IPDV
WLL: 0.5
General: The IPDV drum clamp is for vertical lift and transfer. Allows drum to remain in an upright position during the lift and transfer using one clamp. You can use it either singel or with a number of clamps under a spreader beam to load or unload containers and cargo holds. Features: • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • User manual with test certificate is included with each clamp. • Maintenance and repair kits are available. • IPDV is RFID EQUIPPED.   Material: Alloy steel.Marking: According to standard, CE-markedStandard: EN 13155

Request quotation

Details
Beam Clamp Superclamp B
Superclamp B
WLL: 10
Adjustable runway beam trolley. Fitted with a width adjustment locking mechanism and wheelguarding anti-drop plates. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Request quotation

Details
Screw Clamp - IPSC10 – Ikke for løft
Screw Clamp - IPSC10 – Ikke for løft
WLL: 1.5
General: The IPSC10 screw style clamp is suitable for use in positioning, pulling and turning steel plates and sections. Features: Available in capacities of 1.5 and 3 metric tons. Jaw openings available: 0 to 60mm Suitable for steel with a surface hardness up to 300 HV10. Forged alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. User manual with test certificate is included with each clamp. Maintenance and repair kits are available. Material: Alloy steel.Marking: CE-marked, Logo, WLL, serial number, proofload test date and jaw opening.Warning: Not to be used as a lifting clamp.

Request quotation

Details
Vertical Lifting Clamp IP10H
Vertical Lifting Clamp IP10(J)
WLL: 0.5
The IP10 series vertical lifting clamps are used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines. Available in a variety of models: IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB). IP10J - Larger jaw opening. IP10S - For use with Stainless Steel material. IP10H - For use with materials with a surface hardness to 472HV10 (450 HB). Features: Available in capacities of .5 thru 30 metric tons Higher Working Load Limits are available upon request. Wide variety of jaw openings available: 0 to 155 mm. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. User manual and test certificate included with each clamp.  Full 180° turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. For plate surface hardness till 279HV10, only 5% min. WLL is needed. Maintenance and repair kits are available. All sizes are RFID EQUIPPED. Material: Alloy Steel.Marking: According to standard, CE-markedStandard: EN 13155 Warning: A minimum load of 10% of the WLL is required. Except for WLL 500 kg which requires a minimum load of 5% of WLL.

Request quotation

Details
Beam Clamp Superclamp BFC
Beam Clamp Superclamp BFC
WLL: 3
Offers the benefit of maximum adjustment to fit standard dimensions of bulb flats steel sections. Developed for a multitude of applications in civil and marine engineering, construction and maintenance. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Request quotation

Details
Superclamp A
Superclamp A
WLL: 3
A self locking beam trolley unit with wheel guarding anti-drop plates. Designed for maximum speed of application, minimum maintenance requirements and maximum safety. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Request quotation

Details
Vertical Lifting Clamp IPU10
Vertical Lifting Clamp IPU10
WLL: 0.5
The IPU10 vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye ( a.k.a. universal eye ) allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp.  Available in a variety of models: IPU10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB). IPU10J - Larger jaw opening. IPU10S - For use with Stainless Steel material. IPU10H - For use with materials with a surface hardness to 472HV10 (450 HB). Features: Available in capacities of 0.5 thru 30 metric tons Higher Working Load Limits are available upon request. Wide variety of jaw openings available: 0 to 155 mm. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. User manual and test certificate included with each clamp.  Full 180° turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. For use with materials with surface hardness to 279HV10, only 5% min WLL is needed. Maintenance and repair kits are available. All sizes are RFID EQUIPPED. Material: Alloy steel.Marking: According to standard, CE-markedStandard: EN 13155 Warning: A minimum load of 10% of the WLL is required. Except for WLL 500 KG which requires a minimum load of 5% of WLL.

Request quotation

Details
Beam Clamp Superclamp BA
Superclamp BA
WLL: 1
A lightweight handpushed runway beam trolley. Fitted with a width adjustment locking mechanism and wheelguarding anti-drop plates. Developed for lighter industrial application and are excellent for application in small garages and hobbyist workshops. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Request quotation

Details
Horizontal Lifting Clamp IPHOZ
Horizontal Lifting Clamp IPHOZ
WLL: 3
General: The IPHOZ horizontal lifting clamp is to be used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted. These clamps must be used in pairs or more. Features: • Available in capacities of .75 thru 15 metric tons. • Wide variety of jaw openings available: 0 to 60mm. • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • User manual with test certificate is included with each clamp. • Maintenance and repair kits are available. • All sizes are RFID EQUIPPED. Material: Alloy steel.Marking: According to standard, CE-markedStandard: EN 13155 Warning: Only to be used in pairs.

Request quotation

Details
Beam Clamp Superclamp S1-S4
Superclamp S5-S11
WLL: 3
General: Designed specifically to provide maximum grab width adjustment. Incorporating machined jaw, adjusting mechanism and lifting shackle.Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Request quotation

Details
Ship Buidling Clamp - IPBTO10
Ship Buidling Clamp - IPBTO10
WLL: 1.5
General: The IPBTO10 shipbuilding clamp is used as a temporary tackle eye in spaces which have been reinforced with HP (bulb) profiles such as engine rooms and shipsections. This clamp is fitted with a screwed spindle for easy attachment of the clamp. The moment a load is applied, the clamp is automatically fixed. Features: • Available in capacities of 1.5 thru 6 metric tons. • Wide variety of jaw openings available: HP 160mm to HP 430mm • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • User manual with test certificate is included with each clamp. • Maintenance and repair kits are available   Material: Alloy steel.Marking: According to standard, CE-markedStandard: EN 13155

Request quotation

Details

General

  • Homepage
  • Products
  • Documents
  • Services
  • About us
  • Contact us

Other

  • Renewables
  • Sustainability
  • Aspire range
  • Axel Johnson International

About us

CERTEX specializes in lifting technology and load securing. Whatever the lifting process in industry, ports, construction sites, mining or many other industries, CERTEX offers the right products and services. With a large product range of more than 10.000 items and access to the warehouses of our worldwide suppliers, knowledge about the wire rope and all other areas of lifting technology, we can solve your problem.

Follow us on

Certex Norge AS, Johan Follestads vei 6, N-3474 Åros, Norway
+47 66 79 95 00 | certex.oslo@certex.no

Request sent successfully
Request wasn't sent - a error occured. Please try again.

Request an offer

Request an offer for the choosen products

Product(s) in this request:
Please enter a valid email address.
Fields marked with * are mandatory.