Blocks
Carabiners and blocks are essential tools for climbing, rescue, and rigging. Carabiners are strong, lightweight metal loops with a spring-loaded gate that can be quickly and easily opened and closed. They are used to connect ropes, harnesses, and other gear. Blocks, also known as pulleys, are used to change the direction or increase the mechanical advantage of a rope. Together, carabiners and blocks provide a secure and efficient way to tackle challenging vertical terrain, and are a must-have for any serious climber or rescuer.
Nano-Lok Twin Mini Blocks
Length:
1.8
Twin-tailed mini SRL's, allow very close attachment to harness.
Edge tested: no specific edge testing.
Features for extra safety / comfort:
Anchorage connector attaches directly to back of harness.
No extra carabiner needed.
Fall impact indicator.
Swivel connector helps to prevent webbing from too much twisting.
Adaptable to single leg system.
In twin combination: each block easily replaceable.
Material: Steel, Aluminium, Nylon, PolyesterMarking: According to standard, CE-markedTemperature range: -35°C up to 57°CStandard: EN 360
Request quotation
Fall Arrest Block IKAR HWPS/E
Length:
18
Robust, retractable fall arrest device from IKAR either delivered with galvanized- (HWPS) or stainless-steel wire and swivel (HWPSE).
The device has an internal energy-absorber and hook with fall indicator, and the plastic housing makes its weight and maintenance low.
Approved for vertical and horizontal use.
Edge tested: Tested at sharp edges, R ≥ 0,5 mm (CNB/P/11.060 2008 sharp edge Type A)
Carabiner: IKAR IKV21 (Lk = 186mm) small swivel snap hook (opening Ø 26 mm)
Can be delivered with other carabiners or scaffolding hooks up on request.
The blocks can be delivered with the following approvals: ANSI/ASSE Z 359.14-2014/LE up on request.
Material: Body: PlasticMarking: According to standard, CE-markedTemperature range: -40ºC to +50ºC.Standard: EN 360
Request quotation
Fall Arrest Block ACB 1,8 IKAR for High Reach Platforms
Length:
1.8
Very small, lightweight block. Special design for use in high reach platforms.
Edge tested: tested at sharp edges R > 0,5mm.
Shock absorbtion: max. shock impact 3 kN.
Arrest indicator.
Swivel connector: swivel helps to prevent twisting of web.
Karabiner: double action model.
Material: AluminiumMarking: According to standard, CE-markedTemperature range: -30ºC up to +50ºCStandard: EN 360 Note: The ACB-1,8 is, of course, good for use in any other situation. The special design, however, is aimed at a good solution for the risk of a fall in these platforms.
Request quotation
Fall Arrest Block IKAR with Descent Function HAS
Length:
30
Fall arrest block with automatic descent function. After a fall the block lowers the person concerned with a controlled speed of 0.5 m/sec.
Housing: aluminium.
Fall arrest indicator.
Karabiner: std small swivel snap hook.
Material: AluminiumMarking: According to standard, CE-markedTemperature range: -30ºC to +50ºC.Standard: EN 341
Request quotation
Fall arrester for vertical work WR025
Length:
2.35
WR 025 retractable type fall arrester with expandable textile webbing in a durable plastic casing. Locking mechanism in an impact-resistant casing with a swivel shackle in the upper part of the device. Additional lower snap hook fitted with swivel shackle. The device is intended for works requiring mobility in relation to the anchoring point. Use of a shock absorber is not required.
impact-resistant and light plastic cover
includes shock absorber
weight limit 140 kg
horizontal use 11.054 (WR 025)
below: AZ002AS safety hook with cutter, opening 24 mm, weight 180g
above: AZ011 safety hook, opening 22 mm, weight 180g
fall detector
fastening loop with swivel
Webbing length: 2.35 m
Weight: 850 g + hook
Material: PlasticMarking: According to standard, CE-markedStandard: EN 360
Request quotation
Fall Arrester CR 250HV with Steel Wire Rope
Length:
8
works in vertical and horizontal position
retractable arrester with locking mechanism and automatic fastening wire rope rewind
shockproof and light plastic cover
safety connector with swivel and falling indicator
brake system with energy absorber
separate energy absorber is not required
body dimensions: 270 x 260 x 90 mm
Marking: According to standard, CE-markedStandard: EN 360
Request quotation
SRL Nano-Lok G2, 3M Mini Block Single Leg
Length:
2
The next generation 3M Dbi-Sala Nano-lok G2 personal Self Retracting Lifeline: light on weight and heavy on features.
Features:
Improved safety:
User weight up to 140 kgs, also with anchor point at foot level.
More scaffold hooks available, also gate rated.
Longer lasting: better housing and nitrile rubber shock absorber.
Faster installing upon harness with new steel SRL fast connection system connector.
Dorsal D-ring stays free for rescue with fast connection system.
Easier inspection.
Light weight.
Fall impact indicator.
Swivel in connector helps to prevent twisting of the webbing.
Easy changing from single to twin leg application – and reverse with SRL fast connector.
Available with several connectors on housing side (connection A) and connectors on lanyard end (connection B)
Material: Housing: Nylon - Web: Dyneema® and polyester - Absorber Cover: Nitrile rubber - Top Ring: Zinc plated steelMarking: According to standardTemperature range: -40°C up to 60°CStandard: EN 360 Warning: These models are not specifically tested for sharp edge falls. For these situations see the Nanolok Edge blocks.
Request quotation
Fall Arrest Block IKAR HWPB with Webbing
Length:
9
Robust, low-maintenance fall arrest device with webbing and swivel. The swivel prevents the webbing from twisting. Internal energy-absorber and hook with fall indicator.
Low weight thanks to extra light plastic housing.
Approved for vertical and horizontal use.
Edge tested: Tested at sharp edges, R ≥ 0,5 mm (CNB/P/11.060 2008 sharp edge Type A)
Carabiner: IKAR IKV11 (Lk = 137 mm) Small swivel snap hook (opening Ø 25 mm).
The blocks can be delivered with the following approvals: ANSI/ASSE Z 359.14-2014/LE up on request.
Material: Body: plastic, webbing: Dyneema® Marking: According to standard, CE-markedTemperature range: -40ºC to +50ºC.Standard: EN 360
Request quotation
Fall Arrest Block IKAR HRA with Rescue Winch
Length:
30
Fall arrest block with rescue winch.
Fall arrest indicator.
Karabiner: std small swivel snap hook.
Material: AluminiumMarking: According to standard, CE-markedTemperature range: -30ºC to +50ºC.Standard: EN 341 , EN 1496 Note: The winch is only for rescue. For general hoisting purposes with material loads, or with persons, winches are needed with dedicated certifications.
Request quotation
Fall Arrest Raptor HSG-040
Length:
6
The RAPTOR fall arrester redefines the concept of safety since it has two fall indicators that are visible to users. These display the functionality of the device from the outside. A red indicator warns the user as soon as the device is due for inspection. RAPTOR has a modular construction, which means that elements can be interchanged piece by piece. This makes audits easier and reduces maintenance costs. An energy-absorbing inlet damper protects the device housing and interior mechanisms against damage, as well as the user against injuries. The rope-sparing guide pulley prevents additional wear. The carefully thought-out housing design allows space-saving and device-protecting storage.
Rated load: 140 kg.
Material: AL, ST, Synthetic, PolyesterMarking: According to standard, CE-markedTemperature range: -35°C up to +45°CStandard: EN 360
Request quotation
Fall Arrester CR 250V with Steel Wire Rope
Length:
10
only for vertical working
retractable arrester with locking mechanism and automatic fastening wire rope rewind
shockproof and light plastic cover
safety connector with swivel and falling indicator
brake system with energy absorber
separate energy absorber is not required
body dimensions: 270 x 260 x 90 mm
Marking: According to standard, CE-markedStandard: EN 360
Request quotation
Fall Arrest Block IKAR HWPB with Webbing IKV 55
Length:
2.8
IKAR Fall Arrest Block HWPB with IKV 55 hook.
Lightweight aluminium housing with a webbing lifeline
Swivel eye attachment point
Sewn in load indicator on lifeline
Additional testing against falls over edges
Block can be attached to an anchorage point or safety harness
With IKV 55, a large double action aluminium hook, with Ø61mm gate opening. Material: Body: Aluminium. - Webbing: Dyneema® Marking: According to standard, CE-markedTemperature range: -40ºC to +50ºCStandard: EN 360
Request quotation
Self-retracting Lifeline WR 100
Length:
6
Light and compact safety block with automatic retraction. The snap hook is fiited with fall indicator for higher security.
Material: Kevlar, PolyesterMarking: According to standard, CE-marked, Manufacturer, product, size/length, date of manufacture, reference and serial number.Temperature range: -30°C up to +50 °C Standard: EN 360
Request quotation
Fall Arrest Block IKAR Flexible HWB 2,0 DWX
Length:
2.5
Fall arrest block double with webbing and swivel suspension, which prevents the webbing from twisting. Integrated energy-absorber and retractable lanyard.
Seawater-resistant aluminum housing with retractable lanyard made of almost indestructible Dyneema® webbing.
Approved for vertical and horizontal use.
Edge tested: Tested at sharp edges, R ≥ 0,5 mm (CNB/P/11.060 2008 sharp edge Type A)
Carabiner: IKV 32 with opening width 66 mm in the bottom
Shock absorbtion: Max. shock impact < 4 kN.
Material: Housing: Aluminium, Webbing: Dyneema®Marking: According to standardTemperature range: -40ºC up to +50ºCFinish: Blue paintedStandard: EN 360
Request quotation
Manual Winch IKAR PLW, for persons and loads
Length:
30
Winch certified for hoisting persons and also loads. Easy to combine with IKAR tripods and other mobile anchor devices.
European Machine Directive RL/2006/42/EG.
Cable: stainless steel, diam. 6 mm.
Material: Corrosion resistant, partly stainless steel.Marking: According to standard, CE-markedStandard: EN 1808
Request quotation