Clamps and Trolleys

POWERTEX PPT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam by pushing or pulling thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to user manuals at any time PPT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate. Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

POWERTEX Beam Clamp PBC-S1 is durable and easy to install on different beam types. The beam clamp is designed to provide quick rigging and hoisting points for a great variety of applications. Features: Safe - All POWERTEX Beam Clamps are proof load tested 2 x WLL Compact, lightweight construction Low headroom design Durable all steel construction with powder coated finish and black plated spindle and grip RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each beam clamp Can be turned into Blackline version by adhering the included grey label over the shiny nameplate Blackline products are suitable for use in theatres and the entertainment industry. Marking: According to standard, CE-marked, POWERTEX, Model, WLL, Serial number, QR code Temperature range: -10°C up to +50°C.Finish: Black painted.Standard: EN 13155 Safety factor: 4:1.

POWERTEX Geared Trolley PGT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam using the hand chain thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to User manuals at any time PGT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the Lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate Option: Black painted hand chain instead of galvanized hand chain  Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

POWERTEX geared trolley operated by the chain. A compact and low built design with low dead weight in solid steel construction. It includes mechanical stops to ensure that the trolley is kept on the beam in case of an accident (anti-drop + anti-tilt). Fits most types of beam profiles and most brands of lifting blocks and electric hoists. Wheels with ball bearings. Supplied with the grey label for adhering over white nameplate for use in the entertainment industry. Static test coefficient: WLL x 1,5. Marking: According to standard, WLL, CE and individual serial number.Finish: Black painted.Standard: EN 13157 Note: Working handchain length is 3m as standard. Available in other lengths.Safety factor: 4:1

Adjustable trolley which fits a wide range of beam profiles. The trolleys has a pivoting shaft which ensures that the load is conveyed evenly and safely even if the wheels encounter an uneven surface on the runway. All the wheels are assembled with dust proof ball bearings for maintenance-free operation. The suspension on some trolleys are made for direct integration of VITAL chain hoist to reduce the total height (DM). Standard: Machinery directive 2006/42/EC Marking: CE-markedSafety factor: 4:1

Adjustable trolley which fits a wide range of beam profiles. The trolleys has a pivoting shaft which ensures that the load is conveyed evenly and safely even if the wheels encounter an uneven surface on the runway. All the wheels are assembled with dustproof ball bearings for maintenance-free operation. The suspension on some trolleys are made for direct integration of VITAL chain hoist to reduce the total height (DM). The gear is operated by a hand chain which is either galvanised (ZP) or non-galvanised (NB). Standard: Machinery directive 2006/42/EC Marking: CE-markedSafety factor: 4:1

Adjustable and geared runway beam trolley. Designed and manufactured with wheelguarding anti-drop plates. Standard 3 metre drop of chain supplied, extra lengths upon request. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.