Hooks grade 10
Certex Norge AS has a wide range of grade 10 hooks such as safety hooks, clevis self locking hook, excavator weld-on hook, sling hook, swivel hook, grab hooks, latch hook, grab hook and roundsling hook etc.
All products derive from quality suppliers and produced to either meet or exceed industry standards.
Swivel Latch Hook LKNK
WLL:
4.0
Swivel latch hook with ball bearing for 360° rotation under full WLL.
product-page.material: Quenched and tempered alloy steel.product-page.marking: According to standard, code and grade.product-page.finish: Painted.product-page.standard: EN 1677 product-page.warning: Not to be heat treated.product-page.safety-factor: 4:1product-page.grade: 10
Request quotation
Eye Foundry Hook X-047
WLL:
10
At least 25% greater WLL than traditional Grade 8 products.
Testing according to DIN PAS 1061 and ASTM A952/A 952M.
Proof load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Designed for the assembly of chain slings where wide throat openings are necessary
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Standard: EN 1677-1 Warning: Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.Safety factor: 4:1Grade: 10
Request quotation
Grab Hook OGN w/ latch
WLL:
20
We stock high quality painted Grab Hook OGN w/ latch, a painted grab hook in alloy steel grade 10.
Material: Quenched and tempered alloy steel grade 10.Marking: Code and grade.Finish: Painted.Warning: Not to be heat treated.Safety factor: 4:1.Grade: 10
Request quotation
Clevis Sling Hook X-043/S Grade 10
WLL:
10
At least 25% greater WLL than traditional Grade 8 products.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Magnaflux crack detection is performed 100% on each batch.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-2 Safety factor: 4:1Grade: 10
Request quotation
Safety Hook OBK
WLL:
1.5
We deliver a quality safety hook OBK in alloy steel
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Safety Hook BKG
WLL:
2.6
We deliver a painted quality Safety Hook BKG in alloy steel.
Material: Quenched and tempered alloy steel.Marking: According to standard, equivalent chain size, grade, manufacture's designation and name for positive identifications.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Clevis Self Locking Hook X-026
WLL:
2.5
At least 25% greater WLL than traditional Grade 8 products.
Manufactured in accordance with EN 1677-3 and ASME B30.26.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Magnaflux crack detection is performed 100% on each batch.
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and tempered alloy steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-3 Safety factor: 4:1Grade: 10
Request quotation
Swivel Safety Hook BKLK with Ball-bearing
WLL:
6.8
We can deliver a high quality painted swivel Safety Hook BKLK with Ball-bearing.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Grab Hook GG
WLL:
10.3
Clevis shortening hook. No reduction of working load limit, thanks to supporting cradle lugs on either side of hook to prevent chain link deformation.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
C-grab CG
WLL:
1.5
For use with master link, eye hooks or choke.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Foundry Hook OKE
WLL:
20
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1.Grade: 10
Request quotation
Eye Sling Hook X-044/S
WLL:
40.0
At least 25% greater WLL than traditional Grade 8 products.
Proof Load tested at 2,5 times the WLL with certification for each batch manufactured.
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Magnaflux crack detection is performed 100% on each batch.
Material: Quenched and Tempered Alloy SteelMarking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-2 Safety factor: 4:1Grade: 10
Request quotation
Eye Grab Hook X-041
WLL:
1.4
At least 25% greater WLL than traditional Grade 8 products.
Testing according to DIN PAS 1061 and ASTM A952/A 952M.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Painted.Standard: EN 1677-1 Note: Not for use with Omega LinkSafety factor: 4:1Grade: 10
Request quotation
C-grab CGD
WLL:
9.5
For use with master links.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Excavator Weld-on Hook 8-081
WLL:
1
Safety hook to be welded on the excavator bucket.
Load rated parts are 100% magnaflux crack detected.
Individual forged parts are traceable to Test Certification.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
WLL forged onto each product for quick and easy identification.
Lugs designed to assist the welding process.
A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations."
Material: Forged alloy steel, quenched and tempered.Marking: According to standard, CE-marked, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Yellow painted.Standard: EN 1677-1 Safety factor: 5:1
Request quotation
Swivel Self Locking Hook X-027N
WLL:
2.5
At least 25% greater WLL than traditional Grade 8 products.
Rotate when loaded.
Proof load tested at 2.5 times the WLL with certification for each batch manufactured.
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Magnaflux crack detection is performed 100% on each batch.
Built with ball bearing and enables full swivel feature under load.
Material: Quenched and Tempered Alloy Steel.Marking: According to standardTemperature range: Tempering temperature minimum 400°C .Finish: Blue painted.Standard: EN 1677-3 Safety factor: 4:1Grade: 10
Request quotation
Eye Self Locking Hook X-025
WLL:
19
At least 25% greater WLL than traditional Grade 8 products.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Magnaflux crack detection is performed 100% on each batch.
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-3 Safety factor: 4:1Grade: 10
Request quotation
Sling Hook EK
WLL:
6.8
Sling hook with Eye connector.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Safety Hook BK
WLL:
20
We deliver a quality Safety Hook BK in alloy steel
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Grab Hook OG
WLL:
4.0
Eye shortening hook. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Clevis Swivel Hook, Gunnebo LKNG GrabiQ
WLL:
10.3
For fitting in cranes etc. Swivel for improved positioning (360°).
Marking: According to standardFinish: Powder coatedStandard: EN 1677-2 Safety factor: 4:1Grade: 10
Request quotation
Roundsling Hook RH
WLL:
1
For polyester sling, colour coded.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677-2 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Sling Hook EKN with Latch
WLL:
40
Sling hook with latch.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Safety Hook GBK
WLL:
1.5
Safety hook with clevis connector and grab latch.
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation