POWERTEX Chain Sling G10 in Box PCSB-A-026
Chain diameter:
10
|
EWL:
3
|
WLL:
5.6
Our smart chain sling system in Grade 10 consists of 1-leg and 2-leg slings that can be used directly from the box.
The smart slings can instantly be combined on the crane hook to lift loads that require 3 or 4 legs to be used.
Features:
Multifunctional chain slings Grade 10 packed in box having all necessary markings and documents and ready for use
The smart stainless steel sling tag gives information of the WLL for the sling as configurated, but also when used in any 1-4 leg PCSB combination
Two 1-leg or 2-leg PCSB slings can easy and safely be combined on the crane hook to perform 2-leg, 3-leg and 4-leg lifting operation thanks to the smart sling tag
2-leg slings can also safely be used in a 1-leg lifting operation as adequate information is given on the smart sling tag (Non-used leg should be hooked to the master link to avoid snagging)
+25% higher lifting capacity (WLL) compared to standard Grade 8 slings
Light weight thanks to the smart, multifunctional top components
Cost effective compared to conventional slings thanks to use of multifunctional components
Shortening function is integrated in the master link connector allowing the chain legs to be adjusted instantly
Shortening can be made from either side of the shortener which is a safety advantage compared to shortening clutch.
No reduction of WLL when shortening the chains thanks to the well-designed shortening pockets
Robust self-locking safety hooks are standard
Safe - Each welded master link and chain link is proof load tested in the factory 2,5 x WLL prior delivery
Safe - Each hook and forged coupling component is crack detection tested and samples are proof load tested in factory prior delivery
Components are fatigue rated to +20,000 cycles at 1.5 times the WLL acc to EN-1677 standards
Each component is marked with traceability code that gives full traceability to the raw material
European made lifting chains
The chains are stamped with traceability code that gives full traceability to the raw material
The chain slings are chromium 6 free
The slings are equipped with a drop shaped stainless RFID tag (HF 13,56 Mhz)
QR code for on-site access to Multilanguage user manuals
Fulfills EN 818-4 (+25 % WLL) and the Machinery Directive 2006/42/EC
POWERTEX 2.2 Certificate & EC Declaration of Conformity in 14 languages enclosed
POWERTEX User Manual in 14 languages enclosed
Material: Quenched and Tempered Alloy Steel of Grade 10 qualityMarking: According to standard, CE-marked, WLL, Chain size, Length, Grade 10, Serial number, MFG date, QR code leading to user manual Temperature range: -40ºC up to +200°C without reduction of WLLFinish: Painted blueStandard: EN 818-4 (+ 25% WLL) and ASTM A973Safety factor: 4:1Grade: 10
Request quotation
Master Link MT
WLL:
3.5
Designed for use with chain or wire rope. For 3- and 4-leg slings.
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Master Grab MG
WLL:
2.6
"All-in-one" compact top link.
Material: Quenched and tempered alloy steel.Marking: According to standard, Code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Clevis Sling Hook X-043/S Grade 10
WLL:
10
At least 25% greater WLL than traditional Grade 8 products.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Magnaflux crack detection is performed 100% on each batch.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-2 Safety factor: 4:1Grade: 10
Request quotation
Clevis Self Locking Hook X-026
WLL:
2.5
At least 25% greater WLL than traditional Grade 8 products.
Manufactured in accordance with EN 1677-3 and ASME B30.26.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Tempering temperature minimum 400°C.
Magnaflux crack detection is performed 100% on each batch.
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and tempered alloy steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-3 Safety factor: 4:1Grade: 10
Request quotation
C-lok CLD
WLL:
9.5
For use with master links.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Swivel Latch Hook LKNK
WLL:
4.0
Swivel latch hook with ball bearing for 360° rotation under full WLL.
product-page.material: Quenched and tempered alloy steel.product-page.marking: According to standard, code and grade.product-page.finish: Painted.product-page.standard: EN 1677 product-page.warning: Not to be heat treated.product-page.safety-factor: 4:1product-page.grade: 10
Request quotation
Excavator Weld-on Hook 8-081
WLL:
1
Safety hook to be welded on the excavator bucket.
Load rated parts are 100% magnaflux crack detected.
Individual forged parts are traceable to Test Certification.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
WLL forged onto each product for quick and easy identification.
Lugs designed to assist the welding process.
A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations."
Material: Forged alloy steel, quenched and tempered.Marking: According to standard, CE-marked, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Finish: Yellow painted.Standard: EN 1677-1 Safety factor: 5:1
Request quotation
Swivel Self Locking Hook X-027N
WLL:
2.5
At least 25% greater WLL than traditional Grade 8 products.
Rotate when loaded.
Proof load tested at 2.5 times the WLL with certification for each batch manufactured.
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Magnaflux crack detection is performed 100% on each batch.
Built with ball bearing and enables full swivel feature under load.
Material: Quenched and Tempered Alloy Steel.Marking: According to standardTemperature range: Tempering temperature minimum 400°C .Finish: Blue painted.Standard: EN 1677-3 Safety factor: 4:1Grade: 10
Request quotation
Connecting link X-015 Grade 10
WLL:
26.5
At least 25% greater WLL than traditional Grade 8 products.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Suitable for use with both Grade 8 and Grade 10 chain.
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Type, manufacturer ID, traceability.Temperature range: -40° up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-1 Safety factor: 4:1Grade: 10
Request quotation
Welded Master Link Assembly X-006L
WLL:
22.2
Welded Master Link designed for 3-4 legs Wire Rope and Chain Slings.
At least 25% greater WLL than traditional Grade 8 products. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured
Material: Quenched and Tempered Alloy SteelMarking: According to standard, CE-marked, Type, manufacturer ID, traceability.Temperature range: -40° up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-4 Safety factor: 4:1Grade: 10
Request quotation
Sling Hook EK
WLL:
6.8
Sling hook with Eye connector.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
C-grab CG
WLL:
1.5
For use with master link, eye hooks or choke.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Welded Master Link X-002W
WLL:
4
Welded Master Link designed for 1-2 legs Wire Rope and Chain Slings.
At least 25% greater WLL than traditional Grade 8 products.
Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and Tempered Alloy SteelMarking: According to standard, CE-marked, Type, manufacturer ID, traceability.Temperature range: -40° up to +200°C (without reduction in WLL).Finish: Blue painted.Standard: EN 1677-4 Safety factor: 4:1Grade: 10
Request quotation
Master Link Hybrid MFH
WLL:
7.5
Designed for crane hooks DIN 15401 and 15402. Designed for use with CL, CLD, CG and CGD. 3- and 4-leg chain slings require CLD / CGD.
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Welded Master Link Assembly Crosby A-1346
WLL:
28.1
Features:
Ratings below are for use with chain slings fabricated in accordance with ASTM B30.9.
Individually Proof Tested to values shown.
Meets or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, this master link meet other critical performance requirements including fatique life, impact properties and material traceability, not addressed by ASME B30.26.
Material: Alloy Steel - Quenched and Tempered.Marking: According to standard, Code and gradeFinish: PaintedStandard: EN 1677-4 Safety factor: 5:1Grade: 10
Request quotation
Grab Hook OG
WLL:
4.0
Eye shortening hook. No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Safety factor: 4:1Grade: 10
Request quotation
Coupling Link Gunnebo, G Grabiq
Chain diameter:
16
|
WLL:
10.3
For use with master link and Eye hook.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Chain Sling 2-leg in a bucket
Chain diameter:
8
|
EWL:
5
|
WLL:
3.55
Masterlink type GTVK with shortening hook one end, and safety hook type HKSB/S other ends.
Material: Alloy steelWarning: Not to be heat-treated Safety factor: 4:1Grade: 10
Request quotation
Safety Hook OBK
WLL:
1.5
We deliver a quality safety hook OBK in alloy steel
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Eye Foundry Hook X-047
WLL:
10
At least 25% greater WLL than traditional Grade 8 products.
Testing according to DIN PAS 1061 and ASTM A952/A 952M.
Proof load tested at 2.5 times the WLL with certification for each batch manufactured. Fatigue rated to 20,000 cycles at 1.5 times the WLL.
Designed for the assembly of chain slings where wide throat openings are necessary
When fitting G10 components are added to G8 chain, the sling is rated at G8 WLL.
Material: Quenched and Tempered Alloy Steel.Marking: According to standard, Size, grade, manufacturer ID, traceability.Temperature range: -40ºC up to +200°C (without reduction in WLL).Standard: EN 1677-1 Warning: Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.Safety factor: 4:1Grade: 10
Request quotation
Safety Hook GBK
WLL:
1.5
Safety hook with clevis connector and grab latch.
Material: Quenched and tempered alloy steel grade 10.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation
Swivel Safety Hook BKL
WLL:
4
Swivel safety hook BKL, with recessed trigger.
Material: Quenched and tempered alloy steelMarking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treated.Grade: 10
Request quotation
Master Link MFX
WLL:
4.25
Oversized, for 1- and 2-leg sling.
Material: Quenched and tempered alloy steel.Marking: According to standard, code and grade.Finish: Painted.Standard: EN 1677 Warning: Not to be heat treatedSafety factor: 4:1Grade: 10
Request quotation