Eyebolts/eyenuts to this standard are intended as permanent attachments on equipment such as motors, control cabinets, gear boxes, etc.

The values given for eyebolts/eyenuts used with double-strand slings (cf. table line 2) apply only if the angle between each sling branch and the vertical does not exceed 45°. Larger angles and any lateral loading of eyebolts/eyenuts should be avoided.
Proof: 2 x WLL.

  • Material: Steel C15E.
  • Marking: According to standard, WLL, manufacturer C15, thread & CE
  • Finish: Electro galvanized.
  • Standard: DIN 582
  • Warning: The lifting eyes shall be screwed tight against the surface. When two lifting eyes are used their mutual position shall result in the two eyes at the same level. Larger angle between the slings than 90° are not tolerated. Lifting eyes can not be assembled against a surface that differ essentially from a surface perpendicular to the direction of the lift.
  • Safety factor: 6:1
9408m_e
9408mm_lom_225mm
Select a row from the table below, then click the add to quote button
Part Code WLL
ton
Thread D
mm
L
mm
S
mm
T
mm
Weight
kg
11.40582M08.C15E 0.14 M8 20 36 8 20 0.05
11.40582M10.C15E 0.23 M10 25 45 10 25 0.09
11.40582M12.C15E 0.34 M12 30 53 12 30 0.16
11.40582M16.C15E 0.7 M16 35 62 14 35 0.24
11.40582M20.C15E 1.2 M20 40 71 16 40 0.36
11.40582M24.C15E 1.8 M24 50 90 20 50 0.72
11.40582M36.C15E 4.6 M36 75 128 28 70 2.1
Other dimensions, and type of thread on request.

Load Chart

  drawing load capacities table 1 drawing load capacities table 5
  WLL (ton)
M8 0.14 0.095
M10 0.23 0.17
M12 0.34 0.24
M16 0.7 0.5
M20 1.2 0.83
M24 1.8 1.27
M30 3.2 2.6
M36 4.6 3.7
M42 6.3 5
M48 8.6 6.1