Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper.
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: Diameter and length is after pressing. Below you can find the manufacturer's product data sheet for guidance on dimension selection.
TCU
Select a row from the table below, then click the add to quote button
Part Code Diameter
mm
Size Length
mm
CAD
09.09TCU01 3 1 6.5
09.09TCU02 4 2 9
09.09TCU025 5 2.5 12
09.09TCU03 6 3 14
09.09TCU035 7 3.5 16
09.09TCU04 8 4 18
09.09TCU045 9 4.5 20
09.09TCU05 10 5 23
09.09TCU06 12 6 27
09.09TCU065 13 6.5 29
09.09TCU07 14 7 32
09.09TCU08 16 8 36
09.09TCU09 18 9 40
09.09TCU10 20 10 45
09.09TCU11 22 11 50
09.09TCU12 24 12 54
09.09TCU13 26 13 59
09.09TCU14 28 14 63
09.09TCU16 32 16 72
09.09TCU18 36 18 81
09.09TCU20 40 20 90

Diameter is after pressing.
Length is after pressing.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download

info / downloads