Cranes and Hoists

POWERTEX PCB-S2 Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Durable all steel construction with powder coated finish and plated frame components. Safe, well covered automatic load reaction brake. European made COROLIM® protected load chain. Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 Bottom hook with ball bearing. RFID equipped (chip) for easy service and inspection. QR code for on-site access to Multilanguage user manuals. User manuals in 14 languages included. Testcertificate enclosed. Marking: According to standardTemperature range: -10°C up to +50°C.Standard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX geared trolley operated by the chain. A compact and low built design with low dead weight in solid steel construction. It includes mechanical stops to ensure that the trolley is kept on the beam in case of an accident (anti-drop + anti-tilt). Fits most types of beam profiles and most brands of lifting blocks and electric hoists. Wheels with ball bearings. Supplied with the grey label for adhering over white nameplate for use in the entertainment industry. Static test coefficient: WLL x 1,5. Marking: According to standard, WLL, CE and individual serial number.Finish: Black painted.Standard: EN 13157 Note: Working handchain length is 3m as standard. Available in other lengths.Safety factor: 4:1

POWERTEX PLH-S2 Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic rachet lever. Compact, lightweight construction. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL,  Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX Geared Trolley PGT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam using the hand chain thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to User manuals at any time PGT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the Lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate Option: Black painted hand chain instead of galvanized hand chain  Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

Extremely small and lightweight aluminum chain block. It weighs only approximately 50% of a similar standard chain block. The block can be used for lifting as well as pulling. The hoists are factory equipped with overload protection device (OLP), which limits the maximum operating force that can be applied using the hand chain. Features: Safe - Each block is dynamic proof load tested 1,5 x WLL before leaving the factor Compact, lightweight construction with aluminum covers Durable construction with powder coated finish and plated frame parts Chain block is chromium 6 free Sealed bearings on the chain wheel maximize efficiency and serviceability. Sprocket wheel surface treated against wear and corrosion Safe and well covered automatic load reaction break Equipped with double brake pawls Fine calibrated European made load chain for smooth operation Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist 14 language User Manual enclosed with each hoist Spare parts available Material: Durable aluminium/steel constructionMarking: According to standard, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX Beam Clamp PBC-S1 is durable and easy to install on different beam types. The beam clamp is designed to provide quick rigging and hoisting points for a great variety of applications. Features: Safe - All POWERTEX Beam Clamps are proof load tested 2 x WLL Compact, lightweight construction Low headroom design Durable all steel construction with powder coated finish and black plated spindle and grip RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each beam clamp Can be turned into Blackline version by adhering the included grey label over the shiny nameplate Blackline products are suitable for use in theatres and the entertainment industry. Marking: According to standard, CE-marked, POWERTEX, Model, WLL, Serial number, QR code Temperature range: -10°C up to +50°C.Finish: Black painted.Standard: EN 13155 Safety factor: 4:1.

POWERTEX PPT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam by pushing or pulling thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to user manuals at any time PPT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate. Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

Builds on the standard model, with ball-bearing in the loading hook. This block has a built-in overload protection. Delivered with either a black (NB) or zinc plated (ZP) chain, but for use offshore, the ZP-model is recommended. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Adjustable trolley which fits a wide range of beam profiles. The trolleys has a pivoting shaft which ensures that the load is conveyed evenly and safely even if the wheels encounter an uneven surface on the runway. All the wheels are assembled with dust proof ball bearings for maintenance-free operation. The suspension on some trolleys are made for direct integration of VITAL chain hoist to reduce the total height (DM). Standard: Machinery directive 2006/42/EC Marking: CE-markedSafety factor: 4:1

General: For lifting and pulling in any position: horizontal, vertical and angled. Equipped with locking device allow the load to be locked in exact position. Self-locking safety catch. 360° swivel hooks. Reversible handle will bend at overload warning the operator. Also available in a marine option with anodized castings, stainless steel cables and cadmium plated steel shafts.Marking: Rate badge and CE marking.Note: CERTEX also have spare parts and wire ropes.Safety factor: 4:1.

This leverhoist comes in 1 or 1.5 m lift height as standard. Other sizes can be provided up on request. NR2 is delivered without overload protection. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 13157 , EN 818-7 Safety factor: 4:1

This chain block comes with 3.5 m lift height as standard. Other sizes can be provided up on request. VH5 comes without overload protection, but the similar model VH5 OLL comes with built-in overload protection. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Adjustable and geared runway beam trolley. Designed and manufactured with wheelguarding anti-drop plates. Standard 3 metre drop of chain supplied, extra lengths upon request. Proof load: 2 x WLL. Finish: Yellow painted.Note: All WLL apply to vertical lifting only.Safety factor: 5:1.

Produced with built-in overload protection. Delivered with zinc-plated chain as standard. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 13157 , EN 818-7 Safety factor: 4:1

The KITO LB leverhoist is built with premium grade components and makes it particularly suitable for continuous operation under most severe conditions. Features: Standard supplied with a unique freewheel chain adjusting mechanism with overload protection. Rugged and ergonomic lever handle. Smooth geared mechanism for effortless handling. Robust mechanical load brake increases the safety of the operator. Double-reduction gearing requires minimum manual power for operation at full load. Open load sheave allows easy inspection and cleaning without dismantling the unit. Sealed gears and brake are protected against damage from dust and water. Fourfold riveted and forged carbon steel bottom hook. Abrasion-resistant nickel-plated load chain V(G100) for high and uniform strength (1000 N/mm2), in accordance with standard DIN EN 818-7. Optional: Friction clutch Overload signal Wire rope clip Shipyard hooks Without freewheel mechanism Material: High grade Steel housing, nickel-plated load chain, Carbon steel hooksMarking: According to standard, CE-markedStandard: EN 13157 Warning: Minimum load is needed for the load pressure brake to work correct.Safety factor: 4:1

This lever hoist has 1.5 m lift height as standard. Other sizes can be provided up on request. VR2 is delivered without overload protection, but the similar model NRH OLL comes with built-in overload protection. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 818-7 Safety factor: 4:1

Air chain hoist for loads from 250 up to 2000 kg. These RED ROOSTER Air Chain Hoists are especially developed for heavy industrial use. Robust cast steel body. Valve block is the same for all models meaning: less spare parts required. Standard features: Precise variable speed control (cord- and pendant control). Optimum control of the load, very precise positioning. Compact design. Endstop system. Load limiter built-in without loss of headroom. Cord control or pendant control. Low noise level. Air pressure 0,4 - 0,63 MPa (4 - 6,3 Bar). Optional: Marine Specification/Corrosion resistant Paint systems from C2 - Industrial to C5 - Offshore specification (Red finish as standard. Other RAL colours available on request). Choice of pendants. Radio control pendant for electro pneumatic controls. Control systems. Chain collectors (PVC, galvanised or stainless steel). Various types of hook or clevis available. Air supply systems and valves. Air Service unit. Piped away exhaust air. In house design for "specials". Festoon systems. Main air shut off valve. ATEX: According to EC Directive 94/9/EC (Ex Classification) Recommended: We highly recommend the use of an SMC air treatment unit. (Sold separately.)

Adjustable trolley which fits a wide range of beam profiles. The trolleys has a pivoting shaft which ensures that the load is conveyed evenly and safely even if the wheels encounter an uneven surface on the runway. All the wheels are assembled with dustproof ball bearings for maintenance-free operation. The suspension on some trolleys are made for direct integration of VITAL chain hoist to reduce the total height (DM). The gear is operated by a hand chain which is either galvanised (ZP) or non-galvanised (NB). Standard: Machinery directive 2006/42/EC Marking: CE-markedSafety factor: 4:1

The KITO chain block CX has a light-weight aluminium housing, and is the size of a coaster. The hooks are suitable for a larger intake and its compact measures enables maximum lifting height. Flush-mounted screws at the housing reduce the injury risk. The standard chain block is equipped with an overload protection. Material: High impact aluminium housing, nickel-plated load chain in grade 10.Marking: Type plate with WLL, CE-marking and serial number.Finish: Surface treated aluminium.Safety factor: 4:1

This chain block comes with 3 or 3.5 m lift height as standard. Other sizes can be provided up on request. VL5 comes without overload protection, but the similar model VL5 OLL comes with built-in overload protection. Material: SteelMarking: According to standard, CE-marked, WLL, serial numberTemperature range: -10°C til +50°CStandard: EN 13157 , EN 818-7 Safety factor: 4:1

The KITO LX Series is a range of small lever hoists that is suitable for operations in limited space. The lever hoist has a freewheel safeguard and the bottom hook is riveted in four places. Its solid aluminium housing enables a low weight of the hoist. The load can be lifted or lowered in 2 mm steps due to its smooth gear mechanism. Material: High impact aluminium housing, nickel-plated load chain in grade 10.Marking: CE-marked, Type plate with WLL, CE-marking and serial number.Finish: Surface treated aluminium.Safety factor: 4:1.

Portable hoist to lift and pull loads, for utilization in numerous configurations with long cable lengths. Low weight - quick installation No limitation in terms of cable length Manageable, light-weight, robust, powerful Increase load capacity with deflection sheaves Overload protection Precise load placement within millimeters Safety factor for tackle: 5:1 Marking: Serial number and CE-marking.

General: KITO M3 Series Chain Hoists are built with premium grade components for long life in demanding industrial and contracting applications. M3 lever hoists feature double-reduction gearing for reduced size and weight. Safe, reliable mechanical brake activates instantly, holds the load secu rely. Double reduction gearing for a smaller hoist that requires minimum power to operate. Spring loaded free-wheel for fast, easy load chain free-wheeling. Open load sheave allows easy inspection and cleaning without dismantling the unit Maintenance free sealed gears and brake protected against damage from dust and water. Material: High inpact steel housing, chain grade 10.Marking: CE-marked, WLL, code.Temperature range: -40ºC up to +60ºCFinish: Painted.Safety factor: 5:1