JDT Theile

Advantages:                        

  • Compact design                        
  • Secured four times against breakage                        
  • D-link swings 180°                        
  • Weld-on shackle made of material S355JR according to EN 10025    
  • Material: Eye of alloy steel grade 8. Welding attatchment of steel St 52.
  • Marking: WLL.
  • Finish: Painted.
  • Note: The surface that the lifting eyes shall be attached to shall be flat and tolerate the load it is going to be exposed to.
  • Safety factor: 4:1.
  • Grade: 8
Select a row from the table below, then click the add to quote button
Part Code Code a
mm
b
mm
c
mm
ø d
mm
e
mm
f
mm
l
mm
Weight
kg
07.35901 TAPS 1 32 38 32 13 25 70 42 0.32
07.35902 TAPS 2 34 40 34 14 26 72 42 0.33
07.35903 TAPS 3 47 56 50 18 36 92 54 0.84
07.35905 TAPS 5 55 67 60 22 46 111 63 1.56
07.35908 TAPS 8 68 80 68 26 54 127 68 2.62
07.35915 TAPS 15 82 125 100 30 60 190 120 5.4
kind of attachment  
 Load 1
 
 Load 6
 
 Load 2
 
 Load 5
 
Load 3 
 
Load 4 
number of piece 1 1 2 2 2 3 o. 4
inclination angle 90° 90° 0°-45° 45°-60° 0°-45° 45°-60°
Code  WLL ton
t t t t t t t t
TAPS 1 1,60 1,12 3,20 2,24 1,50 1,12 2,36 1,60
TAPS 2 3,00 2,00 6,00 4,00 2,80 2,00 4,00 3,00
TAPS 3 4,75 3,15 9,50 6,30 4,25 3,15 6,30 4,75
TAPS 5 8,00 5,30 16,00 10,60 7,10 5,30 11,20 8,00
TAPS 8 12,00 8,00 24,00 16,00 11,20 8,00 16,00 12,00
TAPS 15 22,40 15,00 45,00 30,00 21,20 15,00 31,50 22,40
TAPS 20 30,00 20,00 60,00 40,00 30,00 20,00 40,00 30,00
TAPS 25 37,50 25,00 75,00 50,00 33,50 25,00 50,00 37,50
TAPS 30 45,00 30,00 90,00 60,00 45,00 30,00 63,00 45,00
TAPS 35 50,00 35,00 100,00 70,00 47,50 35,00 70,00 50,00
TAPS 40 60,00 40,00 120,00 80,00 56,00 40,00 80,00 60,00
TAPS 50 71,00 50,00 142,00 100,00 70,00 50,00 100,00 71,00
TAPS 63 75,00 63,00 150,00 126,00 90,00 63,00 132,00 95,00